Hello, I am having a massive issue with my canon 2600pro regards to my bulk printing.I am printing around 30meters / 100feet every single day and increasing, the issue I have is that when the machine cuts the art that I am printing, the left over pap...
2 Laptops are connected to an imageRUNNER ADVANCE C350P via Wireless Network. 1 Laptop uses Windows 10, the other Laptop uses Windows 11. Both Laptops have the same shared folder settings and correct entries within the Address Book. The scanner on...
CX-G6400 PVC card printer does not allow thicker card to print. I even tried to customize still it does not work.
We had an E000007-0021 error code. Tech came out and found the upper fixing belt assembly was bad (had a tear). We replaced the part and machine cleared the error. For some reason, our color is not printing good now. We ran a test from Service Mo...
I placed my GP-2000 printer on the stand without having installed the catch-basket first. How can I now attach the catch-basket? Do I have to remove the printer from the stand? HELP???!!!!
Hello,I am trying to recommission my ipf8300s. It had not been used for a very long time, and I learned that some ink in the sub-tanks turned to a goo, preventing the ink from reaching the print heads. I cleaned all the sub-tanks and tubes out like n...
I sent a composite print from Photoshop and the print came out with square sections that didn't print over two of the images. It's happened to us a couple of times over the years and we've never figured out why it happens. We would be very interested...
I need to reset administrator password to default or disable .... I can't apply firmware update and the administrator password I set is not working. Any ideas?
Hi, been using Prograf 2100 for a while with Canon Pro Software. Always been fine. Nothing changed in regard to setup in software or driver etc. suddenly now I get one line just at the start of the print that is the wrong colour and stands out. Pr...
We recently purchased a Canon TZ-30000. When we print "D" size copies from AutoCAD or Bluebeam, the print comes out of the plotter vertical (when plotting landscape) and also 36" square. How do we fix this issue?Any help would be appreciated.
We're using the TZ-30000 in our office, and it's printing much slower than advertised. We mostly print 24x36 black and white drawings from AutoCAD.It’s advertised to print a D-size sheet in 14 seconds, but the fastest I can achieve at the lowest reso...
Been using my TM 200 for a couple of years.Installed a new printhead about 3 weeks ago. Now I am having problems with colour reproduction, and I don't know if it isan ink supply or printhead problem. I have no error messages.I have tried running cle...
Hello, Our Office recently went under new management and the previous manager did not give any ID or Pin to the printer to new management. We are needing to access functions that seem to be locked. No where in the manual does it mention a factory res...
i got a new plotter canon tm-240 fully working with custom papers but if i try to load a fifferent type of support ( not paper) in my case is a type of canvas not reconnized by the plotter system, i am unable to continue and cannot try to print on my...
Hi, I am having issues with my printer, I am using it for bulk printing everyday.It is losing connection to my computer all the time on wifi.I am trying to print with a cord, but it is sending the files incredibly slow.I have tried with Ethernet cabl...
