I replaced the printer head and ink in our image PROGRAF TM300 and keep getting this error..."Printer head cannot be recognized correctly. Open the the top cover and install the correct print head". I installed the correct print head which is the PF0...
Hello. I'm looking for an answer if LM36 scanner can work without plotter? I need just a scanner but I heard different answers from sellers in my country. Some says it needs a plotter (prograf tm350) to set it up and use it, some says that it can ...
Hello I know that you don't officially offer support here but if a registered member can help great. We are trying to setup Direct Send so if users want to scan to email they can. Not sure how this is achieved. I am looking at the How to set up a m...
This was bought without my knowledge and they want me to set it up. I can't figure out how to setup the scanner at all. They want to be able to scan to email, is this possible? I have the scanning part plugged into the network and it has an IP but I ...
Hi all,i just installed an iR-ADV C5840 on 3 new Win 11 Pro PCs.The new printer driver (Generic Plus PCL6 Printer Driver V3.12) shows another picture on the left than the old driver on the Win 10 PCs. See below.Treiber ohne Bild.jpgThe Old driver on ...
Hello,I am having a strange issue with my wide format printer. Whenever I send a new job, the printer is printing extra cyan for the first couple of inches on the lead edge. It will only do this on the first print, so if I send 20 prints, I'll have 1...
HiAfter changing a genuine head my iPF8400SE could not adjust printhead and there is vertical line appears on the print. Tried to carry out the printhead adjustment, both standard and simple but after finishing the process it says printhead adjustme...
i have a canon ipf670 and it has been throwing up a replace printhead error. i have cleaned the printhead just the surface not a flush and the area that receives the discharged black ink and cleaned and reset the waste cartridge. Im running an all bl...
Hello canon community, im new to this, i will try my best to not sound stupid or annoy anyone, apologize if so.I do have a question regarding my toner, currently im using a canon printer, model is Canon imageRUNNER ADVANCE DX C357iF and i cant excatl...
Every time I clean the scanner glass (with 99% isopropyl and microfiber towel) I get worse lines in my scans. Is there something else that needs cleaning that could cause this?
Hello. The ink evacuation area on the far right of the platen became clogged and transferred ink to the underside of the printhead carriage and likely printhead, and is smearing ink on the right edge of the paper.How best to clean the underside of th...
I have a Canon Pro 4000S printer, 42" wide. It is used in a University Lab to print large research posters. About 3 weeks ago it started to leave ink streaks on the paper edges. I would run a print head clean but it would still come back. Now it is w...
I have the canon TM-350 plotter, the ink cartridges from the TM 300 fit in the new TM 350PFI-120 inks. the magenta 120 is different from the PFI-121 in the TM-350my question is can I use the PFI-120 magenta instead of the PFI-121 in the TM- 350 Plot...
I've just updated the firmware on my printer and added Canon paper icc files via the media configuration tool. However, I have not been able to find a reference to Canon Fine Art Paper "Photo Rag" and Canon Fine Art Paper "Museum Etching."I purchase...
I have a PRO 2600 printer and my UCCs are for the canvas materials I am using but I find my outputs a little darker than I want. When I adjust with Photoshop to lighten the darkness, it seems to also flush out the vibrancy of the non-black colors. ...
