Printer Software & Networking
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! Use MX495 with both USB & Wireless

Hello All, I have a Canon MX495.  It is connected by a USB cable to our home PC, but I set it up as wireless so that we can print to it from our laptops. Our home PC is not wireless capable, so it plugs into our router by cable.  We sometimes need to...

ag4mx495 by Contributor
  • 1935 Views
  • 2 replies
  • 0 likes

Moved and Can't Reconnect

We recently moved. Before the move my printer connected to the wifi and laptop just fine. We kept the same router etc in the move but the password to the wifi was changed. When I try to reconnect to the wifi it bypasses the screen to input the new pa...

mwilde by Apprentice
  • 4266 Views
  • 6 replies
  • 0 likes

TS6120 Cant find scanner

Mac OSX 10.11.6 El Cap Pixma TS6120 Prints wirelessly fine, unit sees my macbook, on same network, 99% signal strength... From printer screen- scan to computer- choose my mac,  starts scan- Canon IJ Utility Lite opens, "An error occurred while commun...

Screen Shot 2018-06-05 at 10.44.01 PM.png Screen Shot 2018-06-05 at 10.37.38 PM.png

ipad and canonconnection MG5750

Ive just bought a MG5750 , specifically so I can connect both laptop (HP) and ipad to the printer via wifi. Ive successfully set up the laptop and my android phone , but my ipad cant download the app because , I think, it is a fairly old ipad and doe...

Resolved! Wi-Fi instead of bluetooth

I have just finished configuring my new Pixma TS5120 printer for both Wi-Fi and Bluetooth access. How can I choose which method to use? Thus far, I can only print via Bluetooth even when I turn Bluetooth off. A dialogue box appeared offering me Wi-Fi...

Ninjaman by Apprentice
  • 1507 Views
  • 1 replies
  • 0 likes

Slow Printing MG6120

I recently hooked my Pixma MG6120 to a new wireless network (Eero). The printer, which had always worked perfectly, now takes 45 minutes to print one page!!! I have tried everything I can think of. I've called Eero (no help), I've called Sonic, my in...

ellen2 by Apprentice
  • 1266 Views
  • 1 replies
  • 0 likes

MG7100 printer times out connecting to wifi

After having to reconnect my wifi modem after a remodelling job, my printer is no longer connecting to the wifi; iIt times out during the setup.   I have had no problems with setting it up in the past.   PCs, and phones are all able to connect to the...

ksmith1 by Apprentice
  • 1158 Views
  • 1 replies
  • 0 likes

Canon MB2720 Printer Software

I am trying to name a destination folder for my scans and when I click OK I get a message "not connected to printer".  Thats impossible because I can print/scan anything I want wirelessly.  Any suggestions please?

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!