Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! "Correcting... Wait a moment."

MF733Cdw. I printed a 270 page PDF, duplexed. It started out printing at normal speed, but halfway through it slowed way down (from about 25 pages a minute to about 10 pages a minute) and flashed the message "Correcting... Wait a moment." on the scre...

Patents by Contributor
  • 17805 Views
  • 3 replies
  • 0 likes

Canon ScanGear MF cannot be installed on macOS

I just boutght the new m1 chip Macbook and tried to install my Canon ImageCLASS D530 printer drivers. The MF Utilitiy can be installed, but the Scanner driver cannot. When I tried to install the scanner driver, it showed a warning that ScanGear MF ca...

Screen Shot 2020-12-21 at 1.43.40 PM.png

Black spots on photos needed for Christmas

I am trying to print a photo for Christmas but am getting black dots down the left side of the page (67mm from left side) appearing every 23 mm. I have tried to clean the Tracking belt and the Fixing assembly. I have tried rocking the toner cartridge...

Lcggrg by Apprentice
  • 1786 Views
  • 1 replies
  • 0 likes

iPF5000 error E161-403F

Our iPF5000 is showing this error on powerup. The head carriage locks with the heads at the far right, and there are no menu functions. BY pressing Feed Select and Info while powering on I got it to do an initial motion check and pulled the power so ...

koborn by Apprentice
  • 3087 Views
  • 2 replies
  • 0 likes

Scanner not working

I have a 7000 series Canon copier/scanner/fax wired through a LAN connection to a 2020 PC operating Windows 10. I am able to print from my computer, but when I attempt to scan, the menu briefly shows a LAN option, but immediately defaults to a USB co...

mf642 Error in printing over Wifi

I just bought the ImageCLASS mf642, took it out of the box, connecited it to wifi.  Downloaded software and drivers.  all I get is ERROR for both computers connected.  Anybody know how to outsmart this?  I have been on hold with support for over an h...

Ileana by Apprentice
  • 1471 Views
  • 1 replies
  • 0 likes

ImageRunner C2550 distinctive ring or disable incoming fax

Hello! I have a Canon Color ImageRunner C2550. Are there settings somewhere for configuring distinctive ring? Failing that, is there a setting for disabling incoming fax?  I found this post: https://www.copytechnet.com/forums/canon/141171-canon-ir-c2...

jkugler by Apprentice
  • 1147 Views
  • 1 replies
  • 0 likes

remote UI

I recently bought a MF445 DW printer and it is giving me a headace. I have been trying to set up my remote UI but keep getting the same error message. I have watched Ututbe videos but still keep running into the same problem. I type in the IP address...

Resolved! Canon imageClass MF743CDW - Auto Duplex on A5

How do I achieve auto duplex printing on A5 sized paper?  It is only printing single sided when we select 2-side from the following programs: InDesign, Word, GoogleDocs.  8.5x11 prints fine.

EUadmin by Apprentice
  • 3090 Views
  • 1 replies
  • 0 likes

Density Fine Adjust: what is meant by "High, Medium, Low"?

There are two was to adjust toner density in the printer settings: "Density" and "Density (Fine Adjust)".  The "Density (Fine Adjust)" options offer the ability, for each of the CMYK colors, to adjust a High/Medium/Low setting.  What exactly do these...

georgec22 by Contributor
  • 11656 Views
  • 4 replies
  • 1 likes

Paper Tray Won't Re-load into Printer

I have a Canon MF620C all-in-one and I removed the paper tray to add more paper and now the paper tray won't go in all the way. It stops with about 2.25" of tray still extended.I've tried everything to get the tray back in. Anyone else have the same ...

FuefinaWG by Apprentice
  • 40330 Views
  • 13 replies
  • 4 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements