Hello, I am having issues with my MF244dw's automatic document feeder. When it gets jammed, I am using the MFScanner Utility program and it notifies me to remove the jam. After removing the jam and clicking "OK," it does not resume the job!!! I don't...
I have a Canon printer/scanner 149200 Image Class 4150 Super GS. There was a paper jam and I removed almost a full piece of paper and then a 1" square piece of paper. Now the screen is telling me to "set paper again and set toner again" and of course...
I am using a MB5460 printer and mac computer and am trying to print draft mode but was told by canon support that this option is not available on this model printer. Can anyone tell me if this is the case?
Lately prints have streaks and missing text. I have repeatedly cleaned the nozzles and done some deep cleans as well. All ink tanks are full and I have selected the correct paper and print quality. I tried the highest quality and I got a printout...
Hi folks. I have an MF414DW AIO. No matter what I do I cannot get the Scan to Computer function to work properly. I even downloaded the latest driver and MF Scan manual and reinstalled everything using the manual and it still does not work. I'm t...
Hello I am undecided between buying a Canon Color ImageCLASS MF733Cdw and a comparable laser printer from another company. I am almost sold on the Canon accept 1 thing...............Can the Canon flip my image horizontally (AKA: mirror my image, 180...
Can someone help me with how to get the RX fax that is waiting to print? There are 4 that are sitting there and I can not figure out how to print them. Thank you!!
I have an MF 4570dn. When I print a document directly, the copy is fine but when I photocopy it, it prints very, very light.The cartridges are fine. Any idea(s)?
Hello, would appreciate any help. I have a MF731Cdw getting vertical black bar when scanning from top feeder, but only on every other copy job. If I copy a 10 page job, no vertical line, but every other copy job, I get a vertical bar like line from ...
I'm using my MB 5120 printer over WiFi from a Windows 10 laptop. As soon as I turn on the printer it goes into fax mode. I can't STOP it or turn the machine off. I can pull the power plug, but as soon as it starts it tries to print to the fax. I don'...
Hi, I am in the process of setting my my i-Sensys MF426w mono tone printer/scanner. Wireless LAN is setup and printing works perfectly. The problem arises when I am attempting to scan to an email address. I have logged-in to the Remote-UI and update...
I have a Canon MF634Cdw multi-function printer. Most of my scans go to a single destination. I have added a "Scan to XXXX" entry to the touch screen so I don't need to enter the destination from touch screen each time. Most of the scans use a defaul...
Hello...We are using Canon IR2004 Black and White printer and we connected it in our LAN, using a LAN cable. Now, this printer is showing a problem. That is, after turning on the printer we can access the printer only for two or three minutes, After ...
MAXIFY MB 2300 printer has run out of black ink. However, shows black ink in cartridge. Won't allow change of cartridge. Help please
I was trying to find KB articles with Crop Frame and the results didn't offer solutions to what I was trying to find.
| Subject | Author | Posted |
|---|---|---|
| 11-25-2024 03:11 PM | ||
| 11-23-2024 03:05 PM | ||
| 11-22-2024 06:40 PM | ||
| 11-22-2024 11:58 AM | ||
| 11-22-2024 11:04 AM |
New to the community? Here's some information to help you get acquainted:
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
