Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

MX870 and Mac - no longer can scan

Have had this printer for 3 plus years and could scan.  For the past several mos, lost the ability, probably corresponding to when I installed   OS X Yosemite.  Have downloaded ad reloaded the drivers  but  no luck with scanning still.  I really need...

brinmd by Contributor
  • 7506 Views
  • 11 replies
  • 0 likes

pixima 8720 printer, matte paper

Hello I recently got this printer so far I like it although when I print on matt paper the colours are a little washed out anything I can do about it other than adjusting my colours in the designs? I haven't downloaded any drivers other or anything s...

MX882 Scanner not function

I had not used the device for several months at my summer house. It is attached with a USB and my laptop operating system is Wndows 7. The copier and printer are working, and I can print from the laptop, but the scanner is not functioning. When I pre...

JAK by Apprentice
  • 5213 Views
  • 1 replies
  • 0 likes

printer mx450 , error 5100 .

I have some problems with the quality of my printed documents and photos. I make a maintenance check of my printer and it comes with an 5100 error. My printer is a mx450.

manuelrx by Apprentice
  • 7369 Views
  • 1 replies
  • 0 likes

Resolved! Pixma 5320 won't print black

Pixma 5320 some time ago stopped printing black. I placed the print head in a shallow dish of Windex for 2-3 hours and all was fine for several months. Today it stopped printing black, but soaking print head did not help. Installed brand new OEM prin...

PMHilton by Contributor
  • 3055 Views
  • 1 replies
  • 0 likes

cannot communicate with scanner

Pixma MG5420. It is connected directlty to PC with a USB. It was working fine for 6 months or so, now the scanner stopped working. If I try to initiate a scan using software, I get an error mesage from Scangear "Cannot communicate with scanner for th...

dperaza by Apprentice
  • 99736 Views
  • 6 replies
  • 2 likes

PRIXMA MX882 timing strip came off

I asked help Cannon support how to put the timing strip back on the printer. But said I need a new printer. I have 5 sets of 225 and 226 inks for my printer.They are not compatible with new printers. I need to fix it myself then I don't waste my inks...

Tomyujin by Apprentice
  • 2539 Views
  • 1 replies
  • 0 likes

Printing in black & white

I have a Canon mg2520 printer and an iMac. I cannot figure out how to print in greyscale or just black and white. I followed some steps I read in another post but where I got stuck was when the greyscale was set to "off" with no button or option to c...

Pixma922: Print image fail

Hey,My printer has crapped out over the previous 5 or 6 print attempts.It has plenty of ink. The image was poor and poorly registered. Now the image is barely a shadow of the file to be printed. The printer is about 4 years old. I diid all the obviou...

Need help with MG2520

My Pixma MG 2520 gives a malfunction messgae every few months and I have to remove all Canon drivers and reload them. I saved the instructions I was given by a Canon customer support person back in 2016. It has worked in the past but isnt working now...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements