Desktop Inkjet Printers
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Pixma G7020, Can't print full page.

I have an 8.5X11 document PDF I am printing on a standard  8.5X11 sheet of paper that is basically fully covered. It has a dark border. I can't get it to print exactly the whole page. I get margins, or when I do borderless printing, I still get a tin...

TS 8320 Bad Certificate BS

Printer, still relatively new, won't print. Keeps telling me "bad certificate". Tried to decipher most of the gobbledygook crap recommended solutions to no avail. Should I just throw this POS out the door? 

Canon MG7750

My printer is working fine on Windows 11 except that I need to restart the print spooler every time I start up the computer. The printer device settings tells me that there is no update. Anyone have any ideas? I know that some printers need new drive...

Canon Printer MX360 PIXMA

Greetings - and apologies if this question has already been asked .... Upon replacing my empty 510 Black FINE PG-510 ink cartridge with a new replacement unit, I keep on reading theerror message "check ink" U051 on my printer.It does not allow me to ...

jolas by Apprentice
  • 1581 Views
  • 5 replies
  • 0 likes

PIXMA MP560 - ERROR 6A80

Hi, basically the error is 6A80 which required unplug the power cord and reconnect but shows the same error screen without modifications. It says...: "Printer error has occurred. Turn off power then back on again. If problem persists, see the manual....

Canon TS9120 not printing cyan ink

My cyan cartridge ran out of ink so I replaced it - after replacing, it will no longer print any cyan ink. I have ran numerous cleaning and deep cleaning cycles, replaced the cartridge in case that was faulty, and realigned the printhead. I'm at a lo...

PIXMA MG3620 AND PIXMA TR4520

I was told yrs ago cannot brand was an excellent product for photos so I bought Tr4520 from Amazon, for sm office, that I still have ,that never worked  first there is no led lights to view for accuracy of digits. It wouldn't connect to Internet, the...

Resolved! filter failed

I got the filter failed message, got everything sorted, deleted printer, deleted operating manual, and then went and added back the operating system, and it comes back and says not downloaded because Apple can't check for viruses. how do I get this i...

Resolved! Settings for Kodak Photo Paper - Canon G3000 Printer

HiI have a Canon G3000 Printer and Kodak Ultra Premium Photo Paper (270 gsm, Resin Coated). Please advise me on the correct settings to be used in the Printer for printing on this photo paper. I meant, the type of paper that is equivalent to this Kod...

hanzel by Apprentice
  • 244 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!