Desktop Inkjet Printers
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

one ink empty can't scan

The gray ink has run out. There is no place locally that has any. I ordered it online. It is not here yet. I need to scan something that will not be printed. When I try the printer will not recognize the computer.If I try directly on the printer it s...

Resolved! Pixma MP495 Install not detecting printer

(Pixma MP495 ,Windows 10, installing canon recommended software and drivers)Hello I am trying to install the canon recommended software but when going through the install process it keeps stalling at this point belowWindows detects the printer but th...

radiatedginger_0-1644957573416.png

Pixma TS9120 firmware downgrade

I keep receiving Support Code 1660 after replacing my ink cartridges. This didn't happen until the firmware was updated to 1.13. Upgrading further to 1.14 had no effect either. Please advise.

speedy1 by Apprentice
  • 165 Views
  • 0 replies
  • 0 likes

Resolved! Not Able to Install MX-922 Drivers to New Computer

I recently purchased a new Dell Vostro 5890 Desktop computer.  I am attempting to install the drivers for my Canon MX-922 printer, but am unsuccessful after many tries.  Each time I get an error message:  “Caution!  Cannot detect the printer.  Check ...

bhelin by Contributor
  • 252 Views
  • 1 replies
  • 0 likes

Blank pages

My canon TS 9020 has been printing blank pages. It also makes a loud grinding sound. Steps completed:cleaning Deep cleaningPrint head alignment nozzle check.replaced ink

aruijs by Apprentice
  • 166 Views
  • 0 replies
  • 0 likes

Mg3620

My new Pixma MG3620 turns itself off when it sets unused.  When I get ready to print it requires that I go up a flight of stairs to turn it back on.  How can I prevent this?

TS8630

ANYONE!!!!!HOW the H*ll do I STOP this printer from constantly wanting to use the REAR tray!My printer's location is NOT accessible  to rear paper usage.I do NOT want the printer to select the rear tray like it always does.So far all procedures liste...

donk2626 by Apprentice
  • 142 Views
  • 0 replies
  • 0 likes

PIXMA MG6120 INK CRADLE STUCK

My Pixma MG6120 kept getting the INK ABSORBER FULL" message, and afteringoring at a long while I decided to try to do something.  I tried resetting the printer a few times, with no success .  I decided I would try to clean the absorber pad....But the...

joanne19 by Apprentice
  • 922 Views
  • 2 replies
  • 0 likes

Pixima TS9020 Printing Pink

I have run through all the diagnostics as well as cleaned the printer heads and stil when I attempt to print color I get pinks.  I'm attaching two pictures.  One is of the test run that has the G and H in red showing an issue and a color picture with...

20200329_140006.jpg 20200329_140206.jpg
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements

07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500