Posts
PIXMA G4210 Nozzle Check Pattern black printing issues
Hi Folks. I have a Canon G4210 printer operating off a MAC Catalina operating system. The G4210 Nozzle Check Pattern is starting to have black printing issues. When I print a Nozzle Check Pattern, I notice two problems with the black section. The fir...
MX490 won't print black, other colors OK
I have had a MX490 for awhile now and never had an issue with it. Recently the black ink went low, replaced it....and now it won't print black ink. I've cleaned it, deep cleaned the nozzles, print head alignment, cleaned the whole printer out with ai...
PIXMA TR8620 - New Desktop with Windows 11 Scanner not working
Help please I just purchased a New Dell Desktop and my TR8620 prints fine but it will not scan. Does Window 11 not work with this printer? Or do I need to do something else? I followed the Cannon set up completely online Thank you in advance
PIXMA E4570 prints blue instead of black, gap in print, released paper without printing
I am using canon Pixma e4570 it print blue instead of black also there is gap in printing and in last it released paper without printing. I also changed the cartage with the new but same problem
PIXMA MG7140 stripes in black areas
Hello! Printer mg7140. Replaced the print head, replaced the cartridges, cleaned it, cleaned the GRM. The problem is as follows
PIXMA TR8660a ink not working
Hi. I have a PIXMA TR8660a printer for about a year. Not much use. Recently, the Cyan ink stopped working: not blue colour coming on the paper. Ink levels show as normal and the 2 new Cyan cartridges I have put in, show that they are expended!I tried...
Resolved! Pixma TS9120 Duplex Jams Every Time
My 6-month-old TS9120 worked flawlwssly until last night. Now the printer jams every time trying to print the backside in autoduplex. Single side printing and the front side of duplex printing still work fine every time. But when I try tp print in...
Pixma MX490 Error Code 1684
Replaced black ink cartridge and get error code 1684. When I put the new cartridge in, it beeped so I put it in correctly. I have tried powering down and restarting, but no joy. I am running Win 11.
canon G1020 support code 5200
Support code 5200 suddenly appeared while i was doing black and white printing. Stopped and restarted the printer, But code is again and am unable to print.checked my ink levels, its more then half tank. I cleaned, deep cleaned and even ink flushed t...
PIXMA iX6850 Borderless printing without losing data?
Hello.A Canon web page states:"The borderless printing feature allows printing without any border by enlarging the data so that it extends slightly beyond the edge of the paper."Is it not possible to print all data without loss of information?That is...
Won’t make copies - MG7100
I have MG7100. It will print from my phone or PC but won’t make copies.I have rebooted it and no luck.Help please.Thank you
Canon MP280 horizontal lines???
I've done all the cleanings, and put new ink cartridges in, but these lines keep happening. Is there a way to remove the cartridge holder to clean, or is it something else? TIA
This is my latest: HELP PLEASE! PIXMA MX922 is not printing black properly!
(My latest Reply on 2/20 is important, so if you're new on this one, please read it too)Can I have expert help with my barely ever used, home Canon Pixma MX922's black printing?My home printer that I’ve barely ever used except occasionally has sudden...
TS9500 Printer Paper Help
I have bought homemade paper for my wedding and was really hoping my TS9500 could print on it. The paper is 300gsm, I have 4"x4", 4"x6", and 9"x12" sizes. How can I make this work? TIA!
