MacBook Air and a MX922 "Unable to scan"
I am able to print but I cannot scan except to a USB. I want to be able to scan and save on my MacBook Pro. Sonoma Operating System. Can anyone help? I'm so happy to have found this forum!
I am able to print but I cannot scan except to a USB. I want to be able to scan and save on my MacBook Pro. Sonoma Operating System. Can anyone help? I'm so happy to have found this forum!
why is is my printing, double printing on top an already printed linei has a paper jam and cleared that - realigned all printer heads, and now its double printing totally illegible
I tried to print, but the paper won't load. It seems to kick it back up instead of pulling it into the printer any ideas?
Recently had to relocate my wifi router. We have the printer working with the wifi, but the scanner option will not work. I have gone thru the steps making sure the printer is connected to wifi. Is there another setting on the computer that I have ch...
I had to install the printer on a new device. It printed the test document just fine. But now it has a 1403 error and won't recognize one of the printer cartridges. it is a Canon MX922 printer. I tried removing and replacing the cartridge. Even went ...
Hello. We purchased a Pixma 4722 last September. It worked okay for a while, but about Christmastime it started doublestriking and misaligning horizontally, plus the next sheet of paper would be started and would jam.. I tried to get help but with...
My Canon MG3620 printer has lights that flash green then orange, 7 times. The support article https://support.usa.canon.com/kb/s/article/ART176497 says "Printer error has occurred" and "Service is required." But I can not find the service that is req...
I aligned the heads, cleaned nozzles etc. and even the clear plastic strip and the type is still blurry and double printing so to speak. What's next? Don't want to buy another but will if it's the last resort.
Checked the forum, only fix is to refill ink tanks. Printer is not out of ink, black is 80% full, all colors are 90% full. Tried ink flush several times (>10 times), all colors, black only, colors only. unplugged printer for 10min at a time severa...
recently purchased the G6020 and the very first time i turned it on it made an awful screeching noise - now it sounds like a barking dog every time i turn it on or after it finishes printing (i've printed 4 test pages and one document).is there a fix...
I recently topped off the ink on my Pixma g4210 printer, Now all items selected for printing black text comes out green. How do I fix this?
Hi, I have a Mac Book Pro with OS 10.10.5 (Yosemite). I have the MG6120 Canon printer. Ever since I updated to Yosemite, I am no longer able to scan using the MP Navigator EX software. I get the following error message:"Cannot communicate with sca...
Help! I use the Pixma ix6820 to print the film for screenprinting. I have done nozzle checks, cleaning, etc. and I am still getting the image with random lines through it - see picture. The black areas should be solid.
I have a PIXMA 3620 that I bought in November to replace one that I had for five years and worked well (until it didn't). The replacement prints color fine, but when only using black and white there are obvious print alignment issues. The photo sho...
Can someone explain to me why the heck the ink for this printer costs the same as what I paid for the printer brand new? I mean at this rate I could just go buy a new printer each time I run out of ink cheaper than replacing my ink cartridges
| Subject | Author | Posted |
|---|---|---|
| 01-07-2026 06:36 PM | ||
| 01-07-2026 05:43 PM | ||
| 12-27-2025 03:38 PM | ||
| 12-19-2025 11:55 AM | ||
| 10-06-2025 05:10 PM |
New to the community? Here's some information to help you get acquainted:
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.