Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

My canon ts5050 wont print duplex

So I just bought the canon TS5050 printer and it says its duplex , can print two sided. I have done everything and it doesnt work from computer or the phone. Ive tried the settings on the printer and doesnt show anything named duplex. What can I do ?...

MY 560

My MP 560 has been working fine, up to a few days ago. Just turned itself off. Now when I turn it on , it starts to power up, then shuts right back down. I have tried different outlets, disconnected cord from back, and tried to turn it on a dozen tim...

Glc482 by Apprentice
  • 2397 Views
  • 1 replies
  • 0 likes

Canon 6850 no longer detected on network

I have a Canon 6850 which I have had for two months - connected to two laptops (Windows 10) and two ipads, wirelessly. I have no had problems until two days ago when it suddenly is no longer detected on the network. I have tried to re set it up and i...

bluepalm by Apprentice
  • 3605 Views
  • 1 replies
  • 0 likes

MG565 error Code 1003 (There is no paper)

Brought my Pixma MG5650 in July and all was well running on my iMacHowever it now refuses to take in any type of paper and i get the error message MG565 error Code 1003 (There is no paper)If I gently push the top sheet it will take it ok, but I don't...

Boombas by Apprentice
  • 9080 Views
  • 2 replies
  • 0 likes

Pixma 922 - keeps giving error 1007

 I have a Pixma 922. I use a MacAir, connectring through hot spot. Everything prints from website & WORD.  When I try to print an email it automatically wants to print from the upper tray, which I don't want. The setting is set to US regular paper. I...

cjauvin by Apprentice
  • 6690 Views
  • 4 replies
  • 0 likes

Resolved! MG 5350 Part ID

Following a B200 Error message, when I turned on my printer, I followed up with a thorough inspection of the print head area. I discovered a loose red plastic clip lying between the carriage and it's right hand docking point. I removed it, but despit...

MG5650 IJ Status Monitor problem

HiMy wireless printer is working perfectly however the IJ Status Monitor is not. It pops up saying "port in use" then "printer not responding" as the printer starts printing!! It does not show and ink levels at all. Can I fix this or get rid of it. I...

JONMAL by Apprentice
  • 3808 Views
  • 1 replies
  • 0 likes

Resolved! Canon MX340 and Scanning to file/image

I have an MX340 MFP which is quite a few years old now but prints and copies perfectly.  However the Scanning quality is poor - even on a higher resolution.  I am not expecting a fix (given the age of the printer), but I would like to understand why ...

possiexx by Apprentice
  • 4547 Views
  • 2 replies
  • 0 likes

MG2520 Ink Smears

All normal settings, proper cartridge, normal printer paper.   The black ink just never dries.  The next day, it'll still smear.   Any ideas?  

alpg49 by Enthusiast
  • 3521 Views
  • 1 replies
  • 0 likes

Trouble printing to tray 1

Hi,I'm using an MG7720 running firmware ver 2.0 with an iMac running OS X ver 10.11.6. I've been trying to print to tray 1 using either Preview or Adobe Reader 9, ver 9.5.5. I'm using an odd size card stock measuring 6.25" x 4.5" I entered the unusua...

Screen Shot 2017-03-22 at 2.52.11 PM.png Screen Shot 2017-03-22 at 2.54.38 PM.png
tjeng25 by Apprentice
  • 3106 Views
  • 1 replies
  • 0 likes

MG5622 error code 5100

Right away- out of the box!  I am getting this error after installing ink wells.  They are all seated properly and I see no paper in the tracks.....but the cartridge carrier will not move back into the open so any lights show as on or off and so I ca...

BrammyT by Contributor
  • 2704 Views
  • 2 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements