10-15-2017 02:24 AM
My MP800 is connected to an i7 desktop PC running Windows 10 version 1607. The scanner is controlled by MP Navigator 2.0. Recently (possibly since the update to v1607, but I'm not certain) the scanner frequently hangs at the end of the Nth successive scan. 'N' started out at 6 or more (while scanning multiple slides) but has now come down to 2 and once, today, just 1. The only cure is to use Task Manager to shut MP Navigator down (when hung the normal shut down is unavailable) and then try again.
This has become absurd. Today, I had to try five times before I succeeded in scanning a two-page document. Has anyone else had this problem, or one like it? Any suggestions?
12-27-2017 11:04 AM
Hello.
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.