Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Ink/toner empty!

Hello,I just purchased a TS8151 printer. I have an older mac laptop with OS 10.6.8. I didn't find a driver for my Mac, so I connected to the printer via Google print. I'm able to print from my phone and ipad, but when I send to print from my laptop i...

alinamn by Apprentice
  • 2199 Views
  • 1 replies
  • 0 likes

How to remove output tray (front door) on MX922?

I bought the MX922 because I needed a printer under 18" deep, and the specs on the MX922 say it's 15.6" deep.  But when I print, the output tray (the door on the front) drops down, increasing the depth to something like 22".  In the tight space I hav...

CanonLaw by Contributor
  • 17000 Views
  • 10 replies
  • 0 likes

Mp drivers will not install for mx430 printer.

I recently did a system restore, and now I cannot install the mp drivers for my mx430 printer. I have tried installing from both the disc and from the canon website, and have also tried both wirelessly and using the USB connection. The printer is con...

MG3022 --can find where to scan

I am looking everywhere for where the scanner button is.  When I press the black or color button, it prints what is sitting on the scan bed instead of scanning it.  The whole reason why I bought this model was because it is supposed to scan. Can you ...

Canon IP1700 feed problem

I took the case off my IP1700 to clean the ink absorber, reassembled and reset the ink absorber message.  Now when I try to print a one page test document it will quickly feed one sheet of paper through and out of the printer then feed another sheet ...

Canon MX 432 Printer

What is wrong when I can't use the auto-document feeder on my printer? I get error stating "cannot scan from ADF" after loading paper into the document feeder and after depressing the start button.

hopeful1 by Apprentice
  • 2132 Views
  • 0 replies
  • 0 likes

MP180 Black inc warning - new cartridge

I have 2 new cartridges in my MP180. Color and black. I printed 2 pages out and now I get the black inc warning.  I tried reset it. I have tried to remove the cartridge and clean it and put it back. Nothing helped so far. What do I do?  Where can I g...

Dosferra by Apprentice
  • 2367 Views
  • 2 replies
  • 0 likes

error message 1259

Need help I can't get rid of the error message 1259 on my almost new printer even there is no paper jammed.  Thank you if you know how to solve this problem. 

Clodie by Apprentice
  • 3259 Views
  • 3 replies
  • 0 likes

Canon Pixma MG5650 scanning issue

Does anybody know how to scan a document or selection so the resultant scan is the same size as the original? It has been suggested that I scan at 300 dpi or (by someone else)150 dpi. No matter what I try or what settings I use, the end scan is alway...

Advice re setting up NIB Pixma MG8120

I have had this printer stored safely at home for several years, but never used it. Now I would like to set it up and start printing -- mostly documents, some photos.  Will the ink still work? What advice do you have? Thanks. 

Pixma 7550 vertical lines

Wether printing on matte or glossy photo paper I am getting thin vertical lines(landscape) approx 20mm apart throughout the print! I've checked for correct paper settings wich were ok.

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements