cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

scan multiple pages

vmason
Apprentice

I just installed a canon MG2522 and i cannot scan multiple pages into a pdf file. they come out 1 page at a time. i will be returning tommorow if i dont get a fix to this problem.

4 REPLIES 4

Patrick
Product Expert
Product Expert

Hi vmason,

 

To scan using your PIXMA MG2522, please use the IJ Scan Utility.

 

Please follow these steps:

 

 1.  Open the IJ Scan Utility and click the Settings button in the lower right hand corner.

 

 2.  When the settings open, click on Document Scan on the left hand side.

 

 3.  On the right side, please set "Data Format" to PDF (Multiple Pages).

 

 4.  Click OK.

 

 5.  Attempt to scan your document by clicking the Document button on the IJ Scan Utility.

 

For more information regarding the IJ Scan Utility, please use the appropriate link below:

 

(for Windows)  http://ugp01.c-ij.com/ij/webmanual/ScanUtility/W/MG2500%20series/1.1/EN/SU/Top.html

 

(for Mac OS X)  http://ugp01.c-ij.com/ij/webmanual/ScanUtility/M/MG2500%20series/2.0/EN/SU/Top.html

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

EFPuni
Apprentice

Have just bought a TS5160 which I was asured can perform multiple scanning into single file. I am not able to multi scan. Very frustrating. Can someone help?

Hi EFPuni! 

We appreciate your participation, though we need to let you know that your product appears to be a model that is not supported by our team here at Canon USA. The Canon Community Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.

If you live outside the United States, please click http://global.canon/en.html and select your country to find support in your part of the world.

Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.

Thanks for choosing Canon!

Thanks -appreciate your quick reply.

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!