Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Printer lights B and C constant

Hi I have a Canon MG3000 series. When i turn it on the B and C lights are full on and not blinking.  When i try to print it says the printer is in "error state" but no more details! al advice appreciated.thanks!

MG2500S

Printer has fault that I can't fix.  Printing apprears to be fine on the first part of the page. Partway down the text then prints in white with black / grey tops to the letters so you can only just see it.  I don't think it's an ink shortage because...

Color calibration, Pixma MX922

My color calibration seems to be off when printing pictures. its not as noticable in photos unless the photo is grayscale. But printing solid colors or gradients its severely lacking. I am printing the bisexual flag using the correct paper settings f...

Ceroes by Apprentice
  • 2699 Views
  • 1 replies
  • 0 likes

teal prints blue

I have a Canon Pixma MG 3620 and I'm trying to print a project that is teal, however it keeps printing blue. I've read that it may be the magenta ink cartridge, however my printer's colors all come in one cartridge. I've only come across this issue t...

PIXMA MG7520 stopped scanning

Hello,I've had my PIXMA MG7520 printer for a few years.It suddenly decided to stop scanning. It will still print. The error it gives me is saying that I need to restart everything and/or re-install the printer driver, all of which I've done.I install...

All printing is PINK and BLUE.

Please help..... I was printing in blacck and white and it was fine. All of a sudden it started printing in pink and blue. I did a nozzle check and it was a little bit scratchy, so I did a nozzle cleaning. It didn't work. The colored ink is low, but ...

z1902075 by Apprentice
  • 1870 Views
  • 3 replies
  • 0 likes

4 printers via usb to 1 computer

I'm trying to connect 4 pixma 6820s to 1 PC via a USB hub. I can connect 1, but connecting the 2nd knocks the 1st offline. I've tried with the 1st on and also off. Any suggestions would be gratefully accepted!

BradK by Apprentice
  • 1397 Views
  • 2 replies
  • 0 likes

Resolved! MX472 won't recognize new ink cartridges code 1401

I recently needed to replace my ink cartridges on my MX472 and immediately following  the install, I received several beeps and a code on the LCD display of 1401. That code means ink not installed. Consequently, I cleaned the contact strips with alco...

Gregg1 by Apprentice
  • 23830 Views
  • 6 replies
  • 0 likes

MX452 & Mac OS Big Sur

I've recently purchased a new Mac, which came preloaded with Big Sur. Previous computer ran Mojave, and my MX452 worked just fine. Now, the printer side of the MX452 is functional - but there's no scan function.  Help!

TS6120 Scanner

Everything I try to scan comes out all black (have reloaded driver, etc0, scan from printer, from pc, color or B/W, various modes...it just come out all black. "Copy" does work....Any suggestionsthanks

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements