Printer is giving me the #E08 error code. Saying that the ink pads are nearly full. upon inspectin of the printer, can't find the ink pads. Search of YouTube is silent on this issue. Where are the ink pads, are they user accessible, how do you cle...
Canon PIXA MG5700 printer could not scan and send output to my computer, either wirelessly or even if the computer was connected directly via USB port. Reloaded the printer software but found that the Conon IJ Scan Utility is not installed. I can st...
I have a Canon PIXMA G7040 printer. After deep cleaning of the nozzles, a 5B00 error occurred, and the printer stopped printing. 5B00 means the waste ink absorber is full and needs to be replaced. The yellow error indicator blinked for 7 times contin...
print jammed. in removing it a thin foam piece jammed up under the rollers. i removed the foam, now the prints are not feeding correctly and have a perforation running length wise on the right of the paper.
I was happily using this printer to print double sided on Friday. I have gone to print the same document, with the same settings, today and it will not print duplex. It draws the paper in as though it is going to, but then immediately spits it out bl...
When I load paper works fine. When I try to close the paper tray the paper sticks out about 1/8 to 1/4 inch at the top so it won't close. Is this normal do I have to take the paper out to close the tray?
Pixma MG 3220 How to get rid off clear line across sentence when printing first coupled of pages
I have just installed new printer cartridges. Black and white and color prints look fine. But I get a message telling me to run the print head alignment. I printed the alignment page, placed it in the scanner and pressed the scan button but nothing...
Hello! I recently installed the new driver to run my PIXMA MG2525 on macOS Sequoia V 15.4.1. After the install i was able to print successfully ONCE. I now get an error code that says Support Code: 306 A communication error has occurred. I have googl...
so my printer pulled back my paper and a transparent wire snaped and i dont knaw what to do and i dont want to scrap my printer
Canon TS3522 Chokes Hard. Keeps getting E5 error message after resetting printer, fixing cartridge.I bought this printer for my mom to be a headache free solution. Instead, all I have are headaches from banging my head against the deck because this t...
i moved a near full legit canon ink cartridge from one TR8660 printer to my other TR8660 printer and it does not recognise the replacement cartridge
Hi, I love my Mx922, except when it started printing blurry double text (as detailed by many people ad-naseum all over the internet). The Mx922 is now discontinued - what is the replacement model? I need Black and White printing, ADF with support fo...
When I choose double-sided it says to indicate when to print the secod page, but when I do, it prints the 2nd side on another sheet of paper.
I just changed cartridges in my MX532 and now it won't print at all. It responds to commands from laptop and appears to be printing (carriage moves, no paper jams, 'finished' page is presented as if it is done) but no ink on the paper. I've even put ...
| Subject | Author | Posted |
|---|---|---|
| 12-26-2025 09:49 PM | ||
| 12-26-2025 05:10 PM | ||
| 12-26-2025 02:43 PM | ||
| 12-19-2025 11:55 AM | ||
| 10-06-2025 05:10 PM |
New to the community? Here's some information to help you get acquainted:
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
