Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

PIXMA iP8750 BW prints coming out pink

I have aniP8750 and using w11. Printing a colour print is OK - slight cast but screen and momitor not calibrated. Printing B&W definits warm colour cast. Tried printing B &W image using Greyscale in options in order to get a better B&W result, but re...

BW Print Greyuscale.jpg BW Print.jpg ColourPrint Greyscale.jpg ColourPrint.jpg

multi-page scanning with TR4720

I have 3 questions.1.  What settings do i need to scan 4 pages combined into a single document?2.  What settings do I need to scan 4 pages into 4 separate documents?3.  My scanner goes to "sleep" between jobs.  It used to "wake up" when I would send ...

wjh611 by Apprentice
  • 162 Views
  • 1 replies
  • 0 likes

TR8620 goes offline

I have been printing successfully and the printer goes offline unexpectedly. I have tried shutting it down and restarting to no avail. Any suggestions?

PIXMA MG2922: Paper feed problems

I have a MG2922 printer which has worked great until a few days ago. For no apparent reason it's stopped feeding paper. It starts to pull down the paper, but stops after about an inch or 2. The printer continues as if printing but no paper feeds. I h...

PIXMA TS3522: not taking paper, error 303

I recently replaced my ts3522 ink, both color and black, and it stopped taking paper. it was fine before, I've searched everywhere for a solution and idk how to fix it. it will pull halfway then says 303 please help ripthis was a gift and idk if ther...

issywtf by Apprentice
  • 323 Views
  • 1 replies
  • 0 likes

PIXMA MX722 - Poor image quality... HELP!

Hello, my Canon Pixma MX722 is a little bit old and second hand, but the image quality seems to be really low although it has 9600 x 2400 dpi at max settings. I've played around with the settings on my computer to print it in the highest quality, cha...

hello.jpg

MG5520 c000 code

So I tried to use our PIXMA MG5520 and get the c000 error.The head isn't stuck, it moves the full distance from left to right.I notice that the paper in the tray is not feeding.I've cleaned all the rubber rollers and that did not help.There is no jam...

Byrnet by Apprentice
  • 209 Views
  • 1 replies
  • 0 likes

Pixma G3200 Black ink will not print

Hello! My printer will not print black ink despite the tank being over halfway full. I have performed multiple cleanings, deep cleanings, and even an ink flush and the nozzle pattern is worse each time I check with a new print page. I have also done ...

mnbullis by Apprentice
  • 408 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements