Canon Community

Printing checks from MG2520 without it messing up?

I have a Canon Pixma MG2520.  I use it to print individual checks by inserting them one by one or a sheet of three.  The printer is hit or miss with if it prints the check without printing crooked or the lines way off.  Any tips? 

Printer MX922 will not scan

I am trying to scan from my MX922 printer and I just get the message "set the pc to start scanning"  I am using windows 10 operating system.

i have a Pixma mg2920 only feeds paper half way then stops, paper jam messages

My Pixma 2200 won't load 4X6 photo paper. It will load and print 8.5x11 but nothing smaller.

I've done a roller cleaning and checked for obstructions. The rollers don't seem to be able to catch the smaller size paper. It used to but just stopped. If I push the paper in, it will catch but then just spits it out without printing.

Pixma MX922 and greeting cards...

I'm new to Canon printers and just set up the above printer.  Is there a tutorial available for printing greeting cards? Thanks!  David

troubleshoot yellow blinking light under power button, won't print

My IMac recognizes my CanonMG2520 printer, scanner copier but there is a yellow blinking light belowthe power button & it won't print. Can someone help. Thanks in advance.

Pixma 5520: No black ink, connection drops

I have a Canon Pixma 5520. When printing in black ink, I noticed that the ink was printing only parts of the document. It had the appearance as if someone tried to move the paper while it was going through the roller (part of the letters printed and ...

MG5220 Scanning is not dark enough

I haven't used my scanner on the printer until recently.  It does scan, and I save as .pdf document on a flash drive.  But it doesn't scan very dark.  It is sometimes impossible to read or see what I've scanned.  Anyone else have this issue?  Wonderi...

when installing my mx922 for the fist time I am gettting an error saying os is unsupported?

Canon MX922 stuck on last page

My new printer is connected wirelessly to our two Windows 10-using computers. When asked to print a document, it sits there making whirring and clicking noises for three minutes, then finally starts printing the last page of the document, pauses half...

Canon i850 printer. I replaced the waste inkpads and now it will not power on. What do I do?

Canon i850 printer.  I replaced the waste inkpads and now it will not power on.  What do I do?  Is there a reset  button or could I have knocked something loose inside? Is there a fuse inside?  If I remove the plastic case again, is there any reason ...

canon pixma MX922

Hello everone am looking for user manual for this printer  {windows}  also in my box is pixma MX920  is this the correct setup-cd-rom in box     thank you for your help  can manual be purched

Where do I find the WIA driver for my Canon MX452 printer/scanner please?

trying to scan and keep getting error "you need a WIA driver to use this device. please intall it from the CD or manuf. website".using win 7.Have used scanner many times before, but not in last few months, never had a problem before.