I just purchased a Canon PIXMA TS-3522 about 2 weeks ago. It was pretty simple to set up, but thats about simple as it got. I CANNOT get the E03 error to go away. There is no paper in the back tray or stuck anywhere in the printer. I have printed ...
My Canon TS9210 is printing completely blank pages. I unplugged the printer for a few minutes, replaced all the ink cartridges, cleaned the printhead manually followed by the deep clean maintenance setting and still no luck. I have a feeling it may b...
Is there any way to turn up the brightness on the display screen? I have to keep pulling out my phone and turning on it's flashlight just to read the screen.
When printing an Amazon return label, the barcodes and QR code have white blotches across them. I ran the cleaning cycle and printed out the test result, which was perfect. But that didn't help. This is a Pixma TS6320 with Canon brand ink. All of the...
Ran out of ink in black cartridge, loaded new one and won't print
I am running both a win 10 and win11 PC to print to a G7020 printer via wifi. It takes 30 seconds or more to detect if the status of the printer, and then if it prints it will be very slow and starts and stops during the print out. It used to be fast...
I have a G7020 connected to my three computer 2 Mac, 1 Windows via WiFi all 3 are connected to MS OneDrive. Is there a way to scan from the control panel directly to a folder on OneDrive (all the time) without opening the scanner app/utility?
The printer was just working fine when I was printing some photos in black and white. Then, the photos started to get light, so I assumed the cartridge was clogged. So, I ran some cleaning cycles, well aware that it probably used up a lot of ink. It ...
I have a Pixma MG2525. I keep getting a 5 flash error message. The ink cartridges are the originals. They are well over 50% full. Have disconnected the power. Have taken the cartridges out and re-installed them. Help please.
I have had nothing but issues with this printer since the day I purchased it. It throws up an error code nearly every time I turn it on. I really don't have time for all these errors while I am trying to work. I check everything, make sure it's clean...
My Church's Pixma MG3222 had an E08 code. I cleaned the ink absorber pads but cannot find how to reset the ink counter. I am in hopes that someone can give me advice on this issue and that we are not victims of planned obsolescence. Thanks in adva...
Recently my Canon G7020 printer has started to print very slowly. It is right next to the router so it is not having a problem picking up the Wifi signal.I've had this printer for 3 years and I love it.Do you have any suggestions that a low-tech per...
I have a TR7520 that can't scan through ADF. It worked fine up till now. It feeds the document almost completely through then stops and spits out a blank paper from the bottom tray. I can copy and scan through the glass scanner if I load it manually....
I bought the TS6420, and it works great but the only issue that is so frustrating is that I can not print a document without having to save it first. Is there anyone else on here having this issue. I don't have a business, this is for my personal use...
After printing two documents yesterday, the next two documents suddenly were blank pages. Today when I turn on attempt to print, I get a message that the ink cartridges cannot be recognized. Yesterday, I hadn't done anything with the ink cartridges w...
