How do I find the printer model?
I only have the serial number, but lost my cd to install the driver...ThanksLove
I only have the serial number, but lost my cd to install the driver...ThanksLove
Not working with Windows 10
Hello how can i reset to the factory settings?And to connect wirelessly,i must setup the install program from the CD first,or i must start from the printer menu first,and install the software after that?Thank you
After some initial messing around I managed to install the existing MX922 printer on my newly installed W10. Now I can print but each time I print a document I get the 'printer not responding' message, strangely after a while it prints anyway. Any ad...
What is the best cleaning tool to use on a canon pixma-MP240 for smudges? Using windows
How to I fix the Support Code 6000 on the Canon MX922?
I have a MG5520 printer that gives an error message of "type of print head is incorrect", support code 1403. It is not that old of a printer and I do not use it that often. Any suggestions?
The MP495 won't print, says it's offline. I've been trouble shooting over an hour, re-booted, re-booted the router, shut everything down, waited, etc., I've re-loaded the driver. Please help, I need this!!! Thank you.
For K30323 I know pin 1 is the voltage, pin 3 is the ground. Can someone tell me what pins 2,4,5 and 6 are? On my MX-870 I get a B200 error. The problem may be the printhead but I want to measure the voltage on the 6 pin connector to verify the AC Ad...
How do I change default setting on MX450 scanning? I want default settings to change for location and quality.
Printing on MG7150 with latest win 10 drivers start very very slow , drivers crashes after 3 min.
This printer is not on the list of incompatible Printers so should I be able to Scan now? Any suggestions on what I can do will be most welcome. http://www.usa.canon.com/cusa/consumer/standard_display/windows_upgrade?cm_sp=CSO+CHOSS-_-Service+%26+Sup...
The only solution that I found from the internet is this.Resetter Canon iP2770 Free Download
I have a Canon MX922 printer that once to twice a day displays that it was unplugged. When you press OK it restarts, wasting a lot of ink and losing any incoming faxes it would not print while in this mode. It is not losing power from the outlet as i...
I have just finished a scan from my canon 450 into my laptop. I am attempting another scan but it is not registering as 'on' in my laptop. I have tried changing ports and putting it off and on, but it still won't show as 'on' in my laptop.
Subject | Author | Posted |
---|---|---|
10-01-2024 01:10 AM | ||
09-30-2024 03:41 PM | ||
09-30-2024 12:33 PM | ||
09-30-2024 11:54 AM | ||
09-29-2024 11:07 PM |
New to the community? Here's some information to help you get acquainted:
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.