Showing results for 
Show  only  | Search instead for 
Did you mean: 


G30 No Sound..."What?"

I have a quick question that I hope someone can help with.  I have a G30 that I have been using and enjoying for about 6 months.  Eveything is great BUT for some reason I have no sound with I download my video.  Playback on camera, sound it there, do...

PorkChop by Apprentice
  • 1 replies

Vixia HF R600 -- External mic audio issue

When using an external mic with this camera, all the audio is made to be at the same volume.  This occurs whether the mic level is set to automatic or manual.  And, when set to manual, it occurs no matter how low or high I turn it.  Basically, it is ...

Canon Legria HF G10 uneven exposure

 hello.i have been using your camcorder canon HF G10 for some time, i have noticed one big issue which bothers me a lot.When recording at full automatic, the exposure is very uneven, the aperture is closing and opening very quickly and unpredictable....

Canon XA10

Is there someone out there that is well acquainted with Canon XA10 video camera?  I am a new user and have a few questions that I don't understand from readong instruction manual.  Thanks,  mim1

mim1 by Apprentice
  • 1 replies

Resolved! Rode NTG -2 with Vixia HV40

I did not want to force sliding the Rode microphone into the camera's accessory shoe - I may be missing the obvious.On my other camcorders I can quickly connect/ mount the microphone to the shoe however on the the HV40 I am having an issue. Do I need...

Ezad by Apprentice
  • 1 replies

Canon HF R400 low light settings

Anybody have a suggestion for a good low light setting on the HF R400 so I can eliminate the grainy texture and pixelation in the dark areas?  I'm filiming my daughters' theater productions and it's a small room that is painted black and the lighting...

Data import utility set to autorun

Hi - just bought a Legria HF G30 and love it.  Now trying to upload vids to PC.  On CD is utility called Data Import Utility - so installed it - works fine when camcorder connected via usb, but I have to manually run it.  When I plug my Panasonic cam...

Alanr by Apprentice
  • 0 replies

Vixia HF G20 rejecting sd cards

I have owned this vixia hf g20 camcorder for almost 2 years now, and it has functioned normally. But recently, it has not been able to read or record onto extra sd cards (the ones that go into the 'A' and 'B' slots), however it can record and read th...

Vixia HF200 Will not accept 64GB Class 10 SDHC card

Hello friends, I bought this camera while I the States. Now we live in India. I have a 64 GB Class 10 card and it worked fine up until now...but suddenly the camcorder does not accept the card. I read from folks that I will need to send the camera so...

Elura 80 camcorder cannot record video

My Elura 80 does not record video even with lens cap OFF, in camera mode, tape running, REC showing in viewfinder.Screen and viewfinder are dark - no picture.  Audio works fine and is recording and playing back audibly.I have been advised by Canon th...

JohnMcC by Apprentice
  • 0 replies
Getting started

New to the community? Here's some information to help you get acquainted:

01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.