Camcorders
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

HFS10 - Won't recognize power adapter

Hello, I have a Canon Vixia HFS10 camcorder that was purchased about six years ago. Today, I connected it to my Mac to upload some video I recorded. I went through the normal steps and got a message "Please connect power adapter" (in red). I tried......

Tedology by Apprentice
  • 2981 Views
  • 2 replies
  • 0 likes

Resolved! SDHC

I have the G20 camcorder. I believe speed class 10 cards work best, but what UHS class is best? 1 or 3? 3's are more expensive and if the cam tops out at 24mbps, is UHS3 over kill? Thanks. Also, planning on doing some weddings with these cams. What f...

canon fs40 won't power on

I haven't used my canon fs40 camcorder for almost 2 years.  I tried today and it won't power on.  I've tried the power cord but that doesn't work either.  I can't find my battery charger and can't remember using it before.  Do I need a charger or wil...

Jimmkmn by Apprentice
  • 3417 Views
  • 2 replies
  • 0 likes

date/time info

I received the memory cards from a Vixia HF R52 camcorder.  The .mts video files saved on the memory cards do not have the date/time info embedded in the videos.  Is the date/time info still available somewhere on the memory card?  Is it possible to ...

cwillis by Apprentice
  • 2720 Views
  • 0 replies
  • 0 likes

Vixia hf r50 isn't recognized by my computer with Windows 10

As the topic states, my camera won't connect to my pc. It makes the noise it's connected then quickly goes away. I have no idea what to do. I was hoping to use it for my streams on Twitch, but it not connecting is very confusing and irritating. Can a...

Fino3420 by Apprentice
  • 3109 Views
  • 1 replies
  • 0 likes

ZR25MC tape does not eject

 Tape starts to eject but stops after moving out about one eigth inch. After a few seconds tape carrige will move back.Had same problem repaired under warranty. The tape that is in camera Will not play, fast forward or reverse. Shows "eject tape" err...

Canon Vixia HF R600 Depth of Field

I just obtained this camcorder recently, and I need assistance in managing the depth of field. I would like to record an interview with a single individual, and would like their face to be totally in focus, but their background, which is like 3 feet ...

habanero by Apprentice
  • 8603 Views
  • 9 replies
  • 0 likes

Which camcorder can do unbroken mp4 files

I have a gig where the client needs mp4 files immediately after games. Is there a camcorder such as the g30 or xa25 that'll record unbroken mp4's? I had a G20 and the AVCHD workflow really flowed me down and took forever. Any help is appreciated.

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.