Camcorders
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

FPS setting

Is there a setting for FPS for the  Canon Optura 50 camcorder? I have read through the user manual but could not find ifthere is such a setting? If there is no setting, what does the  camcorder record at, i.e. what FPS?Thanks

no1texan by Contributor
  • 1053 Views
  • 1 replies
  • 0 likes

40 vs. 21

The Vixia HF G40 and G21 look as close to the same cameras just with a different number on the panel. The 21 has a slightly smaller LCD panel but besides that I don't see one difference between the two models. Are there any when it comes to something...

rhckm49 by Enthusiast
  • 3274 Views
  • 10 replies
  • 0 likes

VIXIA HF R800

My manual says this camera has WIFI. But I can't find that setting in the camera. Help?

VIXIA HF R70 question

My VIXIA HF R70 camera won't let me record at 35mbps or at 1/2x speed and I can't figure out why not. Whenever I attempt to change the bitrate to 35mbps the option is greyed out. Same issue with changing recording speed to 1/2x speed. Any advice woul...

Canon G40 lens hood

I was wondering about where lens hoods for the G40 model can be found. Is it straight through Canon, I do have one but may like a second one to be safe.

rhckm49 by Enthusiast
  • 1042 Views
  • 1 replies
  • 0 likes

Resolved! Canon xa11 greyed out selections

Im trying to do a timelapse on the xa11  camcorder but no matter what i try the frame rate and slow and fast motion selection is greyed out ive looked at a youtube video  Gus Da Costa it looks so simple but the two options i need are greyed  out  i c...

Desmond1 by Apprentice
  • 2960 Views
  • 2 replies
  • 0 likes

Elgato video Capture with Canon Elura / Issues with audio

I am using the setup recommended on page 36 of the manual. Using Canon Elura with Elgato Video capture. I have the Elgato connected to PC via USB. to the Elgato I am connecting an S-VHS male cable that is connected to the S-VHS input of the Elura. I ...

belvezet by Apprentice
  • 1018 Views
  • 0 replies
  • 0 likes

FPS Setting for Canon Optura 50 camcorder

I am using a Canon Optura 50 camcorder to record 8mm from Sears Du All Eight projector and was told to set the camcorderto 60 fps to  eliminate  flicker and/or banding. In reading the user manual, I can't find how to set the FPS on the camcorder. Tha...

no1texan by Contributor
  • 1033 Views
  • 0 replies
  • 0 likes

Resolved! MP4 Join Tool No Working

Is there anyone else as frustrated as I am with the way my camcorder automatically splits files at 4 Gb size?  I've downloaded the Canon MP4 join tool but every time I attempt to join clips that are directly transfered from my Vixia HF R800, it tells...

VIXIA HF R800 Audio Quality

I'm having trouble getting a clear sound from our church sound board thru the vixia 800 camcorder. Sounds distorted & "tinny". 

Help on chrome bokk

Hi I have a cannon vixia hf m31 and was wondering if any one could tell me how to get my chrome book to read the videos 

Recording over previous recording

I would like to erase the previous recording on a DVD tape on my Canon Optura 50 and use tape again. Will a new recording erase the previous recording? Thanks

no1texan by Contributor
  • 1520 Views
  • 3 replies
  • 0 likes

Cord query

 Hi, I'm really struggling to find a cord I need for my CANON VIXIA HF G10. Please see attached image. Anyone know which cord I need to purchase for this one? Thanks so much for your help.

IMG_9655 2.jpg

Resolved! Camcorder vixia hf r800

I am using a 64 gb hd card to record. If I record a video for an hour will it all stay in one file? If it splits up will I be notified to restart camera when additional file starts? What if I record at the lower quality setting, will it then go into ...

jimblair by Contributor
  • 2952 Views
  • 5 replies
  • 0 likes

Resolved! Connecting HF S200 to PC

Hi everyone,I have just pourchased a seconbd hand HF S200 and i'm very happy with it but there is a small issue I would like some help with.When I connect it to my PC [Windows 10], it isn't recognised. I've used the cable with it and anotther of my o...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements