cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

File numbering HF R800

rhckm49
Enthusiast

I initalized an SD card and when I put it in the camera, the number that comes before the date does not reset. That is depite the number resetting on my G40 with the same SD card.

3 REPLIES 3

Mark35mmF2
Product Expert
Product Expert

Good morning,

 

It sounds like you may have the file numbering method set to continuous instead of reset. This is changed in your System Setup menu in the camcorder. You can find information on changing the file numbering setting on page 206 of the user manual (https://gdlp01.c-wss.com/gds/0/0300025910/03/vixiahfr80-82-800-im3-en.pdf)

While I am mentioning the R800 camera, why does it not shoot in AVCHD considering that previous models like the 700 do shoot in both MP4 and AVCHD?

Did you try initializing the card in the R800? Personally, I never use AVCHD. I want a higher bitrate than it can accommodate so always use MP4
__________________________________________________________________________________________
EOS C100 mk2 - Atomos Ninja 2 - Zoom H2n - Dell 8700 i7-4790 3.6Ghz, 24GB Ram, Win 10, Nvidia GTX 1060 6GB - DaVinci Resolve Studio 18.1.2 - Blackmagic Speed Editor - Presonus Faderport 1
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.