Speedlite Flashes
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

430 ex ii as external flash

After some research, I saw that the m50 works with the 430 ex ii flash but can it work wirelessly without a flash trigger? Going to purchase it tomorrow off Facebook so I can use it as an external flash. If the wireless function doesn't work with the...

Resolved! EOS Elan 7NE and Canon Speedlite 430EX III-RT Flash

Hi folks...I've searched the forums and not been able to find any info on this topic.  I'm just getting back into film photography after a long hiatus.  I have an EOS Elan 7NE and I need to get a new flash for it.  I was considering the Speedlite 430...

scoraber by Apprentice
  • 893 Views
  • 4 replies
  • 0 likes

Canon old flash on EOS 5D Mark IV compatibility

I am looking to use a older Canon flash on the 5d mark iv. The flash model is the 199a. I understand the voltage output of older flash’s can be incompatible with most new digital cameras. Most of the articles I have read on this subject has been info...

Speedlite 600ex ii-rx support

I realize they are not linked - the transmitter was turned off. Image left is when the flash is simply turned on... image right is when attached to the Magbox. I don't know what that symbol means.I’m having serious issues with my flashes. I have th...

IMG_4227.JPG

Canon Speedlite 420EX

Thinking about getting a second-hand Canon Speedlite 420EX for my Canon 250d. How do I know if it'll be compatible as the 420EX is a much older model and the 250d doesn't have the central metal contact point on the hot shoe? I've been told that the u...

CANON 600EX-RT SPEEDLITE drops link

I bought my Canon 600EX speedlight 3 months ago, I’ve been using it with my Canon EOS mark iv and the Canon speedlight transmitter ST-E3-RT, until now everything went well, suddenly it just dropped link; I thought it was the batteries so I changed th...

Resolved! 600 EX-RT radio problems

I've been having problems while shooting weddings with my 600EX-RT flashes not firing as slaves (radio mode) consistently. I've talked with CPS and we ran through all the possible issues including channel changing but other than trying to upgrade to ...

Resolved! Help! Godox ct-16 trigger not pairing with 430ii

Hello hope someone can help. Any clue why my Godox ct16 trigger doesn’t seem to be working? Also says it’s compatible multiple sales description. New batteries, The triggers communicate fine with each other(doesn’t flash even they trigger communicate...

myim74 by Contributor
  • 854 Views
  • 6 replies
  • 0 likes

Resolved! 430 ex using Youngnuo 622 flash trigger

I just purchased a Youngnuo YN622C-Tx flash trigger and YN622CII receivers.  I'm trying them on my Canon 430ex speedlight.  They work perfectly in ETTL mode, but in Manual mode, I cannot adjust the intensity of the flash nor the zoom from the trigger...

hscody by Apprentice
  • 1395 Views
  • 4 replies
  • 0 likes

Resolved! flash triggers and the canon 430exII can't get it to work

I have a canon 6d, and a 430ex II. I purchased a set of remote trigger receivers and transmitter. I also have an old vivitar flash. I can fire both flashes with the test button on the transmitter. I put the transmitter in the shoe of the 6d. Can not ...

Mwhite by Apprentice
  • 20929 Views
  • 12 replies
  • 0 likes

430EX11- suddenly stoped

I recently started using my 430EX11, here is what transpired over the course of 24hrsI took my 430 flash unit out of the drawer opened the battery port to make sure it had fresh batterys, upon opening, I found some white corrosion build-up, I immedia...

rbtstock by Apprentice
  • 847 Views
  • 6 replies
  • 0 likes

Speedlights

Is it possible to use a 600 EXII RT as a master and a 430 EXII-RT as a slave without adding a trigger system? Will the 600 be able to control the 430?

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.