Professional Photo Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! Magenta Cast on New Pixma Pro 100

I noticed a strong Magenta cast to my prints that have any sort of magenta content.  Most noticeably on Sunsets which all come out red rather than Orange.  I started looking for solutions and cannot believe how prevalent this issue is with Padma Pro ...

Capture.PNG
lwlandy by Contributor
  • 43121 Views
  • 24 replies
  • 1 likes

Maintenance Cover Open error message 1206

I am getting a 1206 (Maintenance Cover Open) error code each time I turn on my Canon Pro-1000.  The maintenance door is NOTY OPEN nor is the maintenance cartridge full or not locked in position.  None the less I have replaced the maintenance tank - d...

AlanM-43 by Apprentice
  • 809 Views
  • 2 replies
  • 0 likes

PIXMA PRO 100

 This printer is by farrr the most difficult thing I have ever had to deal with !! I use a canson aquarelle rag paper 240 gsm, and it takes me about 30 minutes to make one print. I have to manually feed the paper and stay by the printer because it do...

EST011 by Contributor
  • 1074 Views
  • 14 replies
  • 0 likes

Resolved! (SOLVED) PRO 100 ink or paper issue

I've been printing onto Premium Fine Art Smooth paper using my PIXMA PRO 100 for over a year now with no issue. Today, I've discovered a brand new issue where the print itself is looking wrong. I don't know how to describe the issue so I've provided ...

ink issue
babezord by Contributor
  • 1017 Views
  • 6 replies
  • 0 likes

Resolved! Print Line Issue

Hello Canon Community,  I recently bought a Pixma Pro 200 printer and I'm having trouble prinitng a design with a lot of gradients in it. I'm using photoshop and there are quite a number of settings that I can adjust, I'd love to hear what you think ...

IMG_9431.jpeg

Canon Pro-2000 Not seeing Ink

I have two Canon Pro's (one a 2000 one a 2100) that has stopped recognizing that there is any ink cartridge in Gray and sometimes other colors as well. I have tried new cartridges and still nothing.All it says is ink not installed properly.Anyone kno...

Error Code 7400

My imagePROGRAF Pro-1000 is returning a 7400 error code. I have performed all the troubleshooting fixes that are suggested in the manual - cancel all print jobs, turn off printer, unplug, plug in, turn on, but the printer continues to return the same...

Saving a Print Setup on PPL

Hi - so I will need to print a few 3.5 x 5" pictures. I have it setup on an 8.5x11" page. Is there a way to save this setup for future use? Complete newbie with PPL here. Any assisstance would be appreciated. Thanks!

Pixma Pro-1 error B200

Hi there, Error B200 pops up when i turn on my printer, says I should contact service Center. Tried turning it on and off several times and unplugging for some time and plugging it back in to the current but nothing. At one point it did start normall...

LukaAIA by Apprentice
  • 3501 Views
  • 2 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.