Professional Photo Printers
Showing results for 
Show  only  | Search instead for 
Did you mean: 


Resolved! PRO-1000 Maximum Print Lenfth

I only learned a couple of days ago that the maximum print length has been increased through a firmware update, to something like 47 inches.  I tried printing a 30" long sheet cut from a 16" wide roll of Epson paper, and it worked very well.  I had s...

Resolved! pixma pro 100 versus pixma ip8720

Hi: I'm in the market for a new photo printer.  I've had Epsons for years but these Canons really look nice.  I'm looking at the Pixma Pro 100 and the Pixma ip8720.  What is your opinion? Thanks!  

dibanno by Apprentice
  • 12 replies

Mac drivers seem corrupt or incomplete

So after getting my Pro-10 set up after a long time in storage, I got it all cleaned up with fresh ink. I have it set up with a USB cable for the time being. I must have lost the CD that came with it. I decided to just download the drivers and other ...

Screen Shot 2022-03-07 at 5.31.45 PM.png
Rob1198 by Apprentice
  • 5 replies

Pro 300 ink marks

I have a 6 month old Canon Pro 300.  I'm getting ink marks on the side edges of greeting card stock.  The marks are on both side edges of the paper, about 1/4" from the end of the paper.  It seems to get worse the more I print.  Any solutions?

Pixma Pro 10 Printing issue

When printing on 8.5" x 11" paper, The printer is skipping or scratching the print in the top 1-1.5" and then prints just fine.  I do hear a scratching  noise when the page first starts printing.See the attached scan of the top portion of a print. I ...

Printer issue.jpg

Resolved! Pro 9000 Mark II Profiles have gone missing

I changed from an iMac High Sierra to a Mac mini Monterey and no longer show Canon ICC profiles. I used Lightroom on the iMac and it showed the profiles and path but the path no longer exists. No idea how that is possible. I no longer use Lightroom a...

Canon Pixma Pro 100 Printer

Hi, when I print my photos from my printer the people in the photos come out yellow, is there something I can do to fix this issue. Did all the printer diagnostic check everything is good, so I don't know why this is happening.

agrandy by Apprentice
  • 1 replies

3rd party icc profiles

new to canon printer (Image proGraf Pro 300) would like to know if anyone has successfully used epson papers and what setting s were used.  I have epson velvet fine art, premium luster, exhibition fiber and cold press natural.  Looking for media type...

Canon Pixma Pro-10 Printer

I have an Inkjet Printer listed above in Subject that has both the Power white light flashing and the Orange Light flashing alternately 20 times each.I got an error message while printing to unplug printer and that it needed repair!I have tried all t...

Wide banding with Imageprograf Pro-1000?

 Yesterday I noticed that my Canon Imageprograf Pro-1000 has some banding in dark areas of my prints. I've been using this printer for a year and this is the first time I've noticed this issue. It only does it in very dark areas and only in the last ...


Pixma 100 only printing black and white

I have had the pix a 100 a for quite a few years. For last year or so I have printing only my quicken checks.decided to go back to printing photos again. Printer will print checks. When I tried to print a photo, nothing happened. No printing, no erro...

Getting started

New to the community? Here's some information to help you get acquainted:

01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.