Professional Photo Printers
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Pixma Pro 100 never has printed

I purchased a Pixma Pro 100 in August of 2015 and just now took it out of the box and set it up. Before you yell at me, I had a deployed spouse for a year so anything photography just didn't happen. It has never printed. When I went to print my first...

Resolved! PS image not moving into Print Studio Pro

Hello, Several folks have said good things about Print Studio Pro, so after setting up a new Pro-10, I tried to send my first Photoshop image out to it. Although it launches OK nothing shows up in its dialog box. Any help is greatly appreciated. I'm ...

PSP without PS data.JPG

My Image Garden software question

Hi, I do not have My Image Garden software installed; can someone tell me what the power of this software is? Does it recognize photos from cameras other than  Canon cameras(such as Nikon), and how about raw images? Does it display the exif informati...

Resolved! ipf 6400 "in an error state"

When I try to print, my ipf 6400 gives me the message "Printer is in an error state" after I have sent a print job to it. But it gives me no further information, and I can't figure out what to do. I have tried turning the printer off/on, but that doe...

mstratil by Contributor
  • 3511 Views
  • 6 replies
  • 0 likes

Prints too dark...that old chestnut

I know this is a very common issue but I was still hoping you guys may be able to help.  I'm a pro photographer with a good understanding when it comes to profiling my monitor and an OK understanding of printer profiling. I print all my work using my...

Photoshop dialogue.JPG screen1.JPG screen2.JPG screen3.JPG

Resolved! Print Stdio Pro: image not loading into app!

Hi, I'm new to the app, as well as to the Canon Pixma printer.I'm having problems loading an image to the Print Studio Pro on Photoshop CC 2015 (Mac).With the image open in Photoshop, when I click to open the Print Studio Pro, the image simply doesn'...

Captura de Tela 2016-12-12 às 10.13.55.png
alexrb by Contributor
  • 3472 Views
  • 9 replies
  • 0 likes

IPF 700 printing with Windows 10

Hi,My office owns an IPF 700 printer, which we have not used in a few years. Recently we have needed to use the printer again, but I have found that there are no printer drivers available for Windows 10. I thought there might be a way to use the prin...

Ckenlan by Apprentice
  • 3684 Views
  • 1 replies
  • 0 likes

Resolved! MAGENTA CAST ON B&W PRINTS (PRO-100)

I thought I had my Pro-100 issues raised in a separate post all but resolved. But alas even after using Print Studio Pro, I still find a slight magenta cast in the actual print. I'm not sure what to do to correct it. I'm attaching a screen capture of...

Screen Shot 2016-04-17 at 10.18.36 AM.png
ed_vatza by Enthusiast
  • 7839 Views
  • 11 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM