Production Printing
Showing results for 
Show  only  | Search instead for 
Did you mean: 


Is the Canon pro-4100s eco solvent?

I just inherited a new printer and know nothing about it. Is the pro-4100s a eco solvent printer? I have Roland clear static cling that I wanted to use and it seems like it will work fine with my Canon if it is eco solvent. Does this seem right?

steve-w by Apprentice
  • 1 replies

imagePROGRAF PRO-521 Wasting Paper

today installed canon 521-pro, very nice printing but am totally disapointed, if i do print with borderi get more then 1 inch paper wasteg per print, if i do ten 6x4 print i will get 10 inch paper waste,and  if do print with border , i d'nt get any w...

drivers for imageprograf ipf6100

   My OS doesn't recognize my Canon imageprograf ipf6100 after I had the hard drive wiped and went with a new version of Photoshop Elements 2022.   It recognizes my new Epson printer but not my 12-year-old Canon ipf6100.   The driver disks for the Ca...

Resolved! Cannon Colorwave 3600 Prints are thick and blurry.

Our design office has a Cannon Colorwave 3600 for large format printing. We have several staff printing to the Cannon Colorwave 3600 with no complications. When I print, my prints have heavy print lines and text. They are blurry and raised enough to ...

imagePROGRAF IPF825 Part Number

Hello, i am not certain where my Imageprograf IPF825 falls under, i am seeking a part or part number for my Lower roll out printer unit. I have looked at all my paper and cant find detail part numbers, i am not certain where i can go to get it repair...

Registering our Canon imagePROGRAF TA-30

To avoid wasting paper on our TA-30 (something I have yet to figure out), I thought that I would try the "Canon imagePROGRAF Free Layout" software (Mac) that installed with the drivers.  However, when I went to use it, I got a message saying that I c...

Mace65 by Apprentice
  • 1 replies

Canon imagePROGRAF Ta-30 Printing very slow

printer: imagePROGRAF Ta-30OS: Mac os12I recently had to replace the printhead in my printer. After installing the new printhead (PF-06) I was able to continue printing however the intervals between scans is now about 25 seconds. Im printing on adhes...

Canon TM-305 Jamming on cut

Hello everyone,I have a Canon TM-305 that is jamming when trying to cut paper. Does anyone have an idea what may be the cause? We have already replaced the cutting blade and tried a different brand / set of paper. Issue persists.Thank you!

Bluetech by Apprentice
  • 0 replies
Getting started

New to the community? Here's some information to help you get acquainted:

12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!