Production Printing
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! Ink stains on my prints using my new Prograf pro 4100

I have a Prograf Pro-4100 that drops ink on everything I print, right now I am printing on Hahnemuhle Cézanne Canvas Matte, base weight: 430 gsm and thickness: 20.5 mils. This started to happen after printing about seven 34 x 44" photographs, I clean...

Canon Pro 4100 will not power on.

I was printing a job a few days ago on the canon pro 4100 all of a sudden the printer turned off during the job and will not power back on. I think it may be the power supply? any input/ advice to resetting or fixing this issue would be greatly appre...

imagerunner advance DX diagonally fed sensor

Every day, I have to scan in checks at my office, which're varying sizes. With my office's old printer, you could load them up, and they'd scan. Now, I'm getting "Originals may have been fed diagonally. Check the following:" Then it gives the option ...

wallace3 by Apprentice
  • 1223 Views
  • 1 replies
  • 0 likes

Canon imagePROGRAF iPF785 design errors when printing

I am having an issue with the printer changing my design. I created a design that will go across 8 windows, first designing it at the full size and packaging that. Then I created documents at the size of each window and placed the pdf of the full des...

Full Design.png Individual window and printer preview error.png
ochapman by Apprentice
  • 1473 Views
  • 0 replies
  • 0 likes

Pro Luster and Pro Premium Matte on iPF8400

EDIT/UPDATE: Looking for ICC profiles and Media Type Settings for printing Canon Pro Luster and Canon Pro Premium Matte on a Canon iPF8400I have updated printer driver and firmware to latest available. I have also updated media type settings using th...

Ipf506 printer head problem

I have been receiving a message telling me to replace my printer head the printer was working fine before I had my moterbike accident and was in hospital for 3 months and was unable able to use it when I came out until I got my hand working again.So ...

Steve121 by Apprentice
  • 1298 Views
  • 0 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements