Production Printing
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

PRO-4100S cuts off 1" of material before every print.

I just plugged in a new PRO-4100S to replace my other one that was not worth fixing.  By default this new printer will cut off 1" of material before every print I send to it.  I have looked all around for a setting to turn off but cannot seem to find...

signroom by Apprentice
  • 420 Views
  • 0 replies
  • 0 likes

Resolved! imageRUNNER ADVANCE C3330i Defective Printout

Model: Canon IR Adv C3330iDefect: Full of black printout.Explanation: Initially Error Code E21-0420 came, replaced Developing Assy. After restarted, E21-0420 error code solved. After that printer takes abnormal warmup time. After standby mode, tried ...

unnamed (1).jpg unnamed.jpg

Ipf6400 “replenishing ink” forever?

I have an IPF6400 I use for printing screen printing negatives onto transparencies. It doesn’t get much use, but the last time I used it was fine. I don’t do this full time, it’s like a hobby that makes minimal money. I booted it earlier in the week ...

Resolved! imageRUNNER 1730iF latest firmware

Can someone please let me know how to access the latest firmware for the imageRUNNER 1730iF latest firmware?Our non-profit organization was given this printer, and we are attempting to put it to good use for the club.  However, before implementing th...

netmgr by Apprentice
  • 2354 Views
  • 6 replies
  • 0 likes

Slow to no response from Canon IR 3725i Printer

After a recent power surge, my Canon IR 3725i Printer has become extremely slow and refuses to respond after a couple of prints. I am usually stuck with the "receiving" notification and then nothing is functional on my printer again. Cannot print, sc...

Resolved! Banding but only with Baryta - PROGRAF Pro-4100

New Pro 4100 owner here. Most prints are coming out fine but whenever I print with a Baryta the results are pretty bad. The papers in question are Moab Juniper Baryta Rag 305 and Hahnemuhle Fine Art Baryta Satin. The image below is my problem (the ve...

20231117_174338.jpg

Canon L36 copy/scan blank pages

We have a Canon IPF 770 plotter in our office with the L36 scanner/printer on top. It prints with no issues. But, it will not scan or copy. The scans and copies come out either blank or just grainy with random dots all over the paper. In the past I h...

Scan to email on Canon imagePRESS lite c265

Hello, my office uses an imagePRESS lite c265 for most of it's uses. It is able to print and copy without problem, but the scan to email has never seemed to be able to send to emails, (currently, it is sending to a server). I have tried some trouble ...

bmoreno by Apprentice
  • 1519 Views
  • 2 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements