Office Printers
Showing results for 
Show  only  | Search instead for 
Did you mean: 


Resolved! mf644cdw prints images but not text

An update:I had the idea to see what would happen if I tried printing from Windows. So, I brought up an old Windows machine and tried printing the same document from the Window's version of Word and found that it prints correctly. I.e. the text porti...

printedFromWordForWindows.jpg OriginalWordDoc.jpg PrintedWordDoc.jpg
ponders by Apprentice
  • 2 replies

reinstallation of drivers caused print to become very faint

My Canon MF731cdw printer, which was connected by direct connection to my laptop, either would not print at all or would only print after a long delay, so I deleted it in Windows 10 and reinstalled it. This solved the problem and it now immediately p...

butzie by Apprentice
  • 0 replies

MB 2320 Scanner utility not working?

I have a MB 2320 printer I have just installed the software for the Scanner Utility and I am getting this when I try and open it.My printing is working fine and I have it all connected properly to the Wireless Lan, I am also sitting right next to the...

Screen Shot 2021-01-14 at 11.56.00 AM.png
hdg514 by Apprentice
  • 1 replies

MB2720 Black text is not aligned

Hi, how do I align the blank printing so it is not jagged?  Every other color that prints is fine.  I have cleaned and auto aligned the head but no luck. Thank you.


Have a prograf ipf670 that does not display any information on the screen or respond to the control panel buttons. I can get it to print from the computer. Is there a way to reset the printer. I cannot navigate via the lcd screen pad.

IPF Pro-2000 Common Calibration

The printers intial common calibration was set up using the supplied  pack of Canon HW Coated HG paper. Moab Paper Co and ColorByte has recently advised that the internal calibration for the Pro Series should be done using Canon Glossy Photo Photogra...

DBPAU by Apprentice
  • 1 replies

ipf6450 maintenance cartridge question

I let my ipf6450 maintenance cartridge get full and a new one is on the way but taking forever due to the mail slowdown. I have another mc-16 that was briefly installed in another 6xxx series printer. I realize you are not officially allowed to move ...

williwaw by Apprentice
  • 1 replies

iPF 8400s cancels all print jobs sent from network

My iPF8400s wide format printer has started canceling all print jobs sent via the network.I can print when plugged in via USBnot sure what to do?I've deleted printer, downloaded and reinstalled driver program.when installing the setup doesn't "see" t...

Printing an envelope from multi purpose tray MF741Cdw

I've had this printer for a month and have to say up front that I have grown to hate it for the incomprehensible menu trees and the minimum 1 hour wait for tech support. Here's what I want to do: put an envelope into the multi-purpose tray and print ...

Banquo by Apprentice
  • 0 replies

MF743CDW Toner End Of Lifetime

Today, essentially out of nowhere my printer has decided that the Cyan, Yellow & Magenta cartridges have reached their end of life.  I haven't seen hide nor hair of a notificaiton that they were even low so this is very frustrating.  Indeed these are...

melriv by Apprentice
  • 1 replies

Replace printhead

I get i ipf765 the printer was just fine with new printhead printing some imageThe electric power went off and after it came backI turn on the printer but when i send a print jobIt said you new to run a printhead clean or replace itI have run the cle...

Resolved! Should I leave printer "ON"?

I've just installed a Pro 2100 printer and wonder if it should be left switched off when not in use.  I'm coming from an iPF 6100 (14 years old) where the instructions were to leave the power on so the printer could agitate the inks periodically - ab...

BillCB by Apprentice
  • 1 replies

Print Monitor won't queue jobs for layout plugins

Hi I bought new mac with Big Sur OS and have a IPF8400 printer.When I use photoshop with the layout plug-in or the print plug-in, the print monitor does not queue the print jobs, and does not print..But, the Printer works fine with photoshop when i d...

Bad Black Streaking, Wrong colors

Canon imageCLASS MF644CdwIssue 1) Black streaksThis is actualy the newest issue this month. picture sort of says it all. That was a blank photocopy on B&W settings.  Issue 2) Color IssuesI am trying to print the exact s...

Getting started

New to the community? Here's some information to help you get acquainted:

01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.