Canon MB2720 - Poor Print Quality
My MB2710 printer has two problems. Some of the lines are squeaky and the print quality is not great. Also when I copy the window says scanning and it takes a long time to produce a copy.
Posts
imageCLASS LBP6030w Printing Too Light
I replaced the toner but the issue still remains - it is printing very lightly and a bit blurry. Using Mac OS 11.7.4 Big Sur
imageCLASS MF264dw II won't scan, shows error E302-0001
printer won't scan it will do all the other operations it is suppose do but scanning.
imageCLASS MF751Cdw Unable to scan, burning smell
I keep getting error messages 600007, 600108, 600104. Cannot communicate with the scanner. I am able to print. I have added the scanner using both Bonjour and IP address, deleted and restarted MF Scan Utility multiple times to no avail. I also canno...
Resolved! Looking for IPF700 software.
Hello, everyone, I am new to this forum. I recently purchased a used IPF700 off Craigslist for $175. It had no ink or software. I purchased ink and a new maintenance cartridge, installed plain paper and viola it came back to life. Everything printer-...
imageCLASS MF644Cdw Rubbing Noise
My printer started making a loud rubbing noise as it prints. A frequency of about 2 beats a second. It started after I replaced the black toner cartridge, although I didn't think about it at the time. I have checked for any paper or other obstru...
MF726Cdw processing light flashing green but does not print
Hi, I'm having a problem with my mf726cdw where it suddenly does not print or copy. The green processing light continuously blinks green and the printers keeps cycling but no error messages. I just purchased a new set of oem toner 6 months ago whic...
Resolved! MF8580CDW Correct Print Color Mismatch fails
There is a slight red colorshift when printing. Changed cartridges and ran through the cleaning cycles. Try to run the auto adjust and they all fail. Auto Adjust gradatation...fails. Correct print color mismatch fails. Probably try factory reset...
Canon imageCLASS MF720C Series (mf726cdw) -- adjusting gradation results in "correction failed"
I had been struggling with print quality for quite some time on my mf726cdw, with colors printing very lightly. I updated the firmware and reset all settings recently, and to my surprise my prints all of the sudden looked fantastic!Sadly, I enabled a...
Resolved! ImageClass MF741Cdw printing lightly; Adjust Image Quality operations not working
I'm having an issue with our MF741Cdw printing lightly. I read a prior fix and followed its steps toClean the Fixing AssemblyCorrect Print Color MismatchAuto Adjust Gradation - Full AdjustHowever, when I tried to do steps 2 & 3, I received a "Could...
imageCLASS MF624Cw Computer not communicating with the scanner
When attempting to scan from my MF624CW to my Windows 10 computer I get an error the computer or the utility cannot communicate with the scanner. I can print fine, and can scan to a USB thumb drive from the scanner, but for some reason the scanner f...
Resolved! imageCLASS MF733Cdw-Can't Remove Printer Streak
A streak that includes all 3 colors (predominantly the magenta) appears on the top, back side of the printed page. I tried cleaning the printer by going into the Maintenance menu (Fixing Assembly, Transfer Belt (ITB)), but it doesn't make a differenc...
ImageCLASS MF4370dn -- new Mac, not printing
Hello out there and thanks in advance for any help. I recently got a new Mac Mini and it's running Sequoia 15.1 Got and installed the new drivers for my trusty ImageClass MF4370dn --- and nothing will print. It indicates it's connected. This has been...
imageCLASS MF726Cdw suddenly won't print or copy
I'm having a problem with my MF726cdw, which suddenly does not print or copy. The green processing light continuously blinks green, and the printer keeps cycling, but there are no error messages. I just purchased a new set of OEM toner six months ago...
Resolved! imageCLASS D1320 can't find driver on Mac running Sequoia
Canon D1300 Series printer cannot find driver even after installing Canon SoftwareSoftware for this printer isnt available from Apple. Contact the printers manufacturer for the latest software
