My Imageclass D530 is printing lines down each sheet. I've run the "clean fixing unit" function several times and it has not made a difference. I've run over a 100 copies thinking it would get better and it is not. I've tried to clean any where I ...
Hello, My mac was updraded OS to 10.12.6.I already downloaded lastest firmware for the CanoScan 9000F mark II.But after I installed the driver, it cannot performed. It showed "Scanner reported an error Cannot communicate with scanner for these reason...
I have several iR ADV C5535 and 4525's that are failing ShareScan jobs. No error, but a run of a large number of consecutive jobs may stop sending to destination after 1/2 way or 2/3 of the way. No error messages, and the Operator will not know of th...
So I recently got this new printer. It's a large format printer and it looks in good shape. My problem is that when you turn it on the LCD panel doesn't come on at all. It's just blank. Also before the printer when it turns on it calibrates but now i...
I have a canon imagerunner c5185. it's leaving pink dots on all the color prints. i've changed the toner, used the clean inside unit function and opened everything up to blow out with air. i can't get the dots to go away.
Am I doing something wrong? I have the manual tray set to the default, and when I print, it always pulls paper from the drawer. I can get it to pull from the manual tray ONLY by going to preferences, and expclicetly selecting the manual tray.
I have the Maxify 2720 printer and am having problems completing prints. When a job is sent is queues up the job and the printer starts up but it always stops printing after about 95% of the data is sent. It will then try to re-print with the same re...
So I work at a very large company and I'm not *technically* in the IT department. But I'm the most printer savvy person on the floor and I'm trying to solve an annoying issue we have.We have this standalone program that prints information for us. The...
Every so often our iR-ADV C5560i prints out a log of printer/scanner/fax transactions. Is there a way to disable this? Thanks, pjs
Hello all: Today I want to scan a file with scanner of Canon MF Toolbox 4.9. After open the shortcut of scan of Canon MF Toolbox 4.9 and continue to open scan-1, it stopped open and says: ...
I have a working USB connection IN (same cable prints to another printer) on OSX 10.11.6It's set as the default printer and worked perfectly before - a lightning strike - and is now stuck with the blue WiFi light blinking. It is recognized over USB,...
Hi, I wondered if anyone has found a way to change the button layout (9 buttons per page) for all users who log into the copier? I've found even if I changed it logged in as the admin that every user resets to 6 buttons per page which is the default...
I have a mf726cdw all-in-one at my office (about 1 yr old) when has suddenly developed a 'clacking' noise when printing copies. What might be causing this noise, and what would be the solution? I suspect the paperfeed mechanism/rollers? Thx, Mark
Hello. We have a Canon ImageRunner C5235 that we have used for a while and a HP LaserJet 4518 in our accounting office. When the canon is set as the default printer, some reports are not displayed properly. Some columns are cut off. But with the HP e...
So one of our clients has Canon MF411WD printer. He says that everytime he's trying to print, he gets an "I-FAX" message and some kind of red light turns on. Unfortunately I haven't seen it with my own eyes, but I have to figure out why does that hap...
