MF632CDW Solid black line just off center scanning with ADF (Feeder) only
Brand new printer scans on glass perfect I;ve cleaned glass and roller. This is a very solid approx 1/16" wide vertical solid line just off center
Posts
Canon MF Toolbox
I have an older Canon ImageClass MF 4100 laser printer/copier/scanner. The software that comes with it is 32 bit which was fine for my Windows 7 computer. I am now using a Windows 10 laptop which is 64 bit so the installation disks don’t load. I was ...
Resolved! ImageClass MF644CDW - New Printer, No clue how to use..
Well this is a sort of embaressing. I've been dealing with low and high end printers for 25 years. Inkjets, laser writers, copiers, etc etc. Bought a MF644CDW last week of Christmas 2019. Got busy with with work, and put the entire reason for the pr...
Resolved! Color imageCLASS MF743Cdw Paper Jam
Purchased a Color imageCLASS MF743Cdw yesterday. There is no sign of mis-handling of the box, I carefully and thoroughly removed all the packing matericals and tape, updated the firmware and then attempted to print on Georgia-pacific Standard Paper 8...
Duplex printing choice greyed out on MF644 connected via LAN to iMac running Catalina
I just attached a brand new MF644 connected via ethernet to my iMac running the latest software (Catalina). When I go to print a 2-sided document, there is no 2-sided option in the "Default" printing preset. When I go to the "Layout" menu the 2-sided...
ImageClass mf247 wirelessly prints but won't scan
I've installed all available drivers from the Canon website, but when I try to scan a document, it tells me that my computer is not able to connect to the scanner. I can print documents from the same computer, and the computer and printer are both c...
Unknown part that came with printer
ImageClass MF743Cdw printer. Came with plasitic part that was not explained in any documentation that I could find. Photo included. Can anyone tell me if it is needed and where it would be placed? Thanks, dcollens
Wires
My color imageclass mf733cdw has some wires sticking out of back near the top, and I don't know what purpose they serve. Coincidentally my document feeder doesn't work, so there may be some relation between the two issues.
Imageclass mf4350D - Printer Prefence window does not show
This printer has worked wonderfully for years but since MicroSoft last update of my Windows 10, it's not working right. The first issue was my scanner no longer worked. I found a patch for that so now the scanner option is OK. However, for some reaso...
Resolved! Imageclass MF733cdw Scanner not connecting to computer
I have an imageclass MF733cdw. I have been using for months no, with no issues. I am suddenly unable to scan to my computer. I have read several posts regarding Windows 10 update causing the problem, however, the fixes I have read have not helped ...
Brand New MF445dw printing problems (dash marks printing all down my paper)
I just purchased this printer and downloaded the drivers and hooked it up to my laptop with a printer USB Cable. I don't think it is a driver problem, but the driver is Canon Generic Plus UFR II V200. When it prints, about 1.5 inches from the left m...
scanner D550 not responding after Windows 10 installed
My Canon imageClass D550 scanner is not responding upon operation. I suspected it might be because of my recent upgrading the PC to Windows 10. I downloaded a driver of above model but could not be able to install it by observing an error message of ...
MF642CDW Blue printing too dark
I've only had this printer for a couple of weeks. I've been trying to print something that is primarily blue and it keeps printing a darker blue than it actually is. I've tried a few different progarms (PS, GiMP, Windows Photo Viewer, etc.) and two d...
Resolved! Fax setup
Just purchased the mf743cdw and went through setup. Must have done it wrong as fax answers everytime. Just the one line. I had previous set up to only answer/respond to fax tone after phone and answering machine. How do I go back to reset fax sett...
MF726Cdw NOT Scanning to PC
I've done everything I can within my skill set to fix this problem, even going so far as the nuclear option by reseting my computer to factory default settings. This still didn't fix the problem. This problem only affects the PLATEN GLASS scanner, t...
