Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

mf644cdw will only print blank pages

I recently replaced the toner cartridges for my mf644cdw. Since then the printer will only kick out blank pages when I print to it or try to make copies. I have updated the firmware of the printer and on my computer. I am at a loss as to what is goin...

Resolved! Maxify MB2720 only prints one page in Linux

I have installed the Canon software for my MB2720 (cnijfilter2-5.40-1-deb) on MXlinux-KDE and can only print the first page of a job. (All hardware works correctly while running Windows 11.) The PPD file supplied (canonmb2700.ppd) does not support th...

Canon MF642C Poor printing

This is an example of the output of any document that I attempt to print.  There are magenta and yellow blotches across every page and a black /gray haze covering the page.  I have attempted to clean the printer via the maintenance settings and chang...

Canon MF642C Example.jpg

imageCLASS MF642Cdw Cyan Not Printing

I would like to get this printer repaired as the colour cyan does not print. I have gone through all the steps with a technician and even put a brand new toner cartridge in but it still does not print that colour. I now only use it for BW printing. E...

EleanorB by Apprentice
  • 1113 Views
  • 4 replies
  • 0 likes

imageCLASS D570 Strange pink ting on pdfs when I scan

I have a Canon Image class D 570.  When I use preview the scanner works fine.  If I then select "scan" I get two vertical red lines on the scan, the left hand side is pink. I can avoid this if I use "save" after preview, but I don't like that.Picture...

Pink .jpg

Canon ImageClass MF641CW Not Printing Black

Hello,I have purchased a new laser printer and can't seem to get any black text to print and on top of that, every page comes out with a gray shading. Waiting for Canon support on the phone and they deemed it an issue with the black toner. New toner ...

enzo5190 by Apprentice
  • 867 Views
  • 1 replies
  • 0 likes

Resolved! imageCLASS MF3010 Ghost images

I have a Canon MF3010 laser printer that has been fabulously reliable for years. But it has started printing ghost images.  I changed the printer cartridge and ran the "Clean the Fixing Unit" program, but the new cartridge is just as bad.  The cartri...

DSCF9275.JPG

MF743Cdw keeps saying paper jammed, but it's not

Hello,My ImageCLASS MF743Cdw is reporting a jam, to be fixed in 5 steps from the display1) remove jammed paper2) open back cover3) remove jammed paper4) lift the 2-sided unit5) close the back coverAs soon as I close the back cover, it goes back to "2...

carimer by Apprentice
  • 5374 Views
  • 1 replies
  • 1 likes

ImageClass MF743CDW Print fax confirmation page

Just set up this new printer and sent a fax.  Looks like the fax went through but a confirmation report did not print.  I figured out how to turn on this feature but how can I print a confirmation page for the one that I already sent?

jwarth by Apprentice
  • 6974 Views
  • 4 replies
  • 1 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements