03-08-2023 02:24 PM - last edited on 03-08-2023 02:34 PM by Danny
I have had my Canon MD452dw for only about 2 months and now when I print on the bottom of the back of the page there is a light gray band (as if in extra ink smudged across). I have done the self-cleaning that the printer has, and it did not fix the issue. Oddly, if I print double sided, both sides are clean and there is no gray line or smudges.
Any ideas as to what is causing this and how to stop it?
03-22-2023 01:38 PM
If you are getting streaks on the back side of the paper you can try cleaning the Fixing assembly 2-3 times to see if the smudges start to fade. If that does not resolve the issue, you can try reseating the toner cartridges and checking for any loose toner powder that can be wiped up with a damp cloth. If that does not resolve the issue, I would suggest contacting support over the phone at 1-800-652-2666. Our agents would be happy to check the hardware and can provide service options if needed.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.