Mobile & Compact Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

PIXMA IP110 NOT STAYING ON

Hello all,I have downloaded the new firmware as Canon suggested.  We have turned the router off and on.  My printer is cabled to my laptop rigtht now.NO GO. HELP AND ADVISE PLEASE A

APRILE by Contributor
  • 641 Views
  • 1 replies
  • 0 likes

Resolved! Pixma iP110 will not turn on

Hello all,I have a Pixma iP110 printer that will not turn on. The printer is only pulled out of a drawer for printing on occasion, so it's not plugged in all the time. We've printed 2 times since mid-April to provide an idea of the frequency the prin...

kimrru by Apprentice
  • 11467 Views
  • 53 replies
  • 5 likes

Pixma iP110 starts up then shuts itself off

I'm using the Pixma iP110 with macOS Monterey (12.4) and a 16" MacBook Pro M1 Max. I've had the printer working flawlessly since February when I bought my new Mac, then 2 days ago it stopped working. I turn on the printer, it goes through it's bootup...

Resolved! ip110 turns on, checks ink, then turns off

Canon says the solution to this problem would be to turn off the "automatic shutdown" feature in Power Settings. I am unable to find those settings in the Printer Utility. Of course the printer is no longer connected to my computer via Bluetooth.I'm ...

cph by Contributor
  • 3507 Views
  • 14 replies
  • 1 likes

PIXMA ip110 turnign off after a few seconds on

I start having this issue last Sunday and to my surprise many people are complaining about the exact same issue and across different printer models. Then someone was saying that the issue is the connection to the internet. Well, I disconnected first ...

AHofmann by Contributor
  • 679 Views
  • 1 replies
  • 0 likes

Wrong ink cartridge size

I have a CP 910 wireless printer, I’ve had it for a few years and have never really had any issues. Now all of a sudden I’m getting two messages at the same time. The first one is saying “wrong paper size” and the second one is “ wrong ink cartridge ...

Tm828 by Apprentice
  • 1833 Views
  • 3 replies
  • 0 likes

Selphy Square QX10 recurring paper jam

I replaced the ink cartridge in my Selphy Square QX10 and, following that, every time the device prints, it only feeds about 1", then errors out with a paper jam.  When I look inside the device, I don't see anything obvious issues or culprits.  I've ...

nickib19 by Apprentice
  • 2225 Views
  • 2 replies
  • 0 likes

canon selphy CP-1300 Paper Tray and Ink cartridge

Hello,I have just bought a Canon Selphy CP-1300 on November 23, 2020 and would like to know if I want to print on the 2x3 photo paper is it safe to switch out both the 4x6 photo tray and the ink cartridge that came with the 4x6.  Or should I leave th...

pjw400 by Apprentice
  • 2798 Views
  • 3 replies
  • 0 likes

Cannon cp1200 black screen

I have an issue with my canon cp1200, after several months I didn’t use it , now the screen is black with no informations except cannon written in white, can’t read the usb and the buttons are not responding 

Ghadeer by Apprentice
  • 785 Views
  • 1 replies
  • 0 likes

Selphy 1200

I've had my selphy for years and have never had any problems until now, the bottom inch of the picture does not print, I have try everything I can think of to fix. any suggestions would be extremely appreciated. 

Resolved! Can't print on Selphy CP760 using an SD card

My new Dell laptop is not compatible with my Selphy CP760 printer, so I've been copying photos from Icloud and emails etc onto an SD card, however recently I've had problems doing this, the printer shows a dark screen with a ? mark, any ideas why it'...

Howard52 by Apprentice
  • 1792 Views
  • 1 replies
  • 0 likes

Selphy CP900

I have a Selphy photo printer CP900 and since I updated to Mojave on my Mac the printer will not work.  Any suggestions on how to get it to work? 

sharif1 by Apprentice
  • 4540 Views
  • 8 replies
  • 0 likes

Pixma IP100

I have a MacBook Air with Monterrey OS12 and I'm trying to get my Pixma IP100 printer to connect via USB with a converter into the c port. I can't get the printer to show up on my Mac. There is no driver available for this operating system. Are they ...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements