Hello, I recently had a problem with the MG 7720 CD tray. I've recently updated my computer to Mac OS High Sierra (version 10.13) and the printer does work fine, but when I try to print CD's with it. The CD's print, but it doesn't print a label out. ...
My Canon MX700 printer is rapidly failing, having been in perfect working order two days ago. Can anyone suggest what might be wrong, and how to fix it? It's a few years old, but has only ever had to cope with light workloads. Two days ago I began en...
Need a driver for my MX 860 Multifunction Printer for macOS 10.14.5 but all sources indicate no such exists. Canon site says this OS is not supported for this printer. Am I out of luck? -Bill
I just took it out of the box and set it up yesterday, and it was working just fine. This morning I attempted to print on a CD disk using the M-Tray it said paper jam 1st and said to remove M-Tray then immediately went into the Error 6000. I have ch...
I've been helping a friend set up their TR8520 printer after their MX922 broke down. I've bene having trouble setting up the fax so that it behaves like it did on the MX922. I wasn't able to check the settings on the MX922, but they told me that they...
oonly had this printer for a couple of weeks, since converting to Windows 10 from 7.It worked for a couple of sessions, but will not now?I have tried "troubleshoot" in win 10, but nothing found.Can anyone offer some advice please?
Just got my new printer. The manual says to fill the ink tank with all six bottles. Three black ink bottles come with the device BUT it filled with only 1 1/2 bottles. Is this right? jim
MX700 goes thru the motions of printing...noises and such.......but produces a blank page when. Pressing the Copy/Black buttons. Pressing the Copy/Color buttons produces an image. There is no indication that the Black Ink supply is low from the 4...
Hi, All! I read somewhere that this printer prints banners 12 x 26 in. Is this true? If so, can it print inkjet fabric banners?
Hi,I've read the directons on how to reset by unplugging for a while and then plugging in directly to an outlet. Does anyone have any other suggestions?This printer has been working perfectly with light use for 5 years. Is it just time to junk it? It...
I setup my printer and it worked for a few days. Now when I try to print, I get the error "The printer is performing another operation". Anyone know what is going on?
I have an MG7120 that has been having print issues. The results are inconsistent. Sometimes they are faded, splotchy, missing lines, won't print anything at all, etc and other times the results are absolutely perfect. I've done all the maintenance ...
how can I clear this error, B200. Canon no longer supports the product?
Hi,I am having trouble changing the color settings in the printouts in macbook. I need to reduce contrast and change tint because colors are very far from faithful. Thanks. Nipun
Are there drivers for a PIXMA MG3220 printer for an iPad Pro?
| Subject | Author | Posted |
|---|---|---|
| 02-04-2025 07:44 PM | ||
| 02-04-2025 12:18 PM | ||
| 02-04-2025 11:59 AM | ||
| 02-04-2025 11:50 AM | ||
| 02-03-2025 06:45 PM |
New to the community? Here's some information to help you get acquainted:
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
