Canon Pixma G5020 new printer
I have just received a new Canon Pixma G5020 printer and on setting up when the language selection shows on the screen and English is selected the OK button does not respond
I have just received a new Canon Pixma G5020 printer and on setting up when the language selection shows on the screen and English is selected the OK button does not respond
Getting error message 1411 when trying to print. I have rebooted printer, reseated printer head and changed cartridges. How do I know if it is the printer head or something else? Don't want to spend $200 on new head if it is something else. Tha...
This started unexpectedly with no prior degradation and NO Error Messages. Scan and Print work perfectly. To date I have: 1) Aligned Print Heads; 2) Run Troubleshooter; 3) Performed a Full Rest, 4) Updated All Drivers; 5) Check ALL settings.I only ...
I was printing an this morning and it was printing fine through the main cassette. I chose another item to put in cue and suddenly it all started to print from the rear tray. Of course, I received a message no paper as I only print photos from that...
MG3650s says it’s out of paper (orange light blinking twice) but there is plenty of paper in there. I have tried one sheet, 10 sheets and 20 sheets, will sporadically decide to print once and then start blinking again. Why are canon printers so usele...
I replaced my ink cartridges and now the printer won't print. The printer is communicating with my desktop, but the pages are blank.
Has anyone been able to connect to the scanner of an MG4250 with their M1 Mac.After waiting for the scanner to connect for 39 sec I get the error message:Failed to open a connection to the device (-21345)
Trying to print to IP4300 printer--using Win 11, now.Windows cannot detect the printer. Also, tried to download the manual. Go thru the download gyrations, but nothing opens! WHAT??!!!
Hi. My Canon PIXMA MX922 prints wavy lines and ghost images. I've ran EVERY diagnostic and I have also cleaned the clear strip inside the printer. HELP!!! Is it just the printer's time to expire?
I have a Pixma 6820 inkjet that works well, but I can't get it to print on stickers. It loads the paper, makes some internal noise for about 20 seconds, and then shoots the paper out without trying to print.Previously when printing on Avery sticker ...
My Canon g3010 printer print in faded colors even after I did deep cleaning. I really need help fixing it. Looking forward for your reply RegardsAaysha
My printer will not print it when I run troubleshooting it says nothings wrong. When I check printer status it just says jobs are in queue
Changed ink cartridge, error comes up, 1485 stating install cartridge correctly. What do I do
Subject | Author | Posted |
---|---|---|
03-14-2025 01:56 PM | ||
03-14-2025 03:34 AM | ||
03-13-2025 09:42 PM | ||
03-13-2025 08:14 PM | ||
03-13-2025 07:28 PM |
New to the community? Here's some information to help you get acquainted:
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.