Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Pixma TR8520

I just bought a Canon TR8520 Printer.  The My image Garden program keeps freezing up. I bring up task manager to close it and it list it as a 32 bit program.  My Computer is a 64 bit.  Is this the problem?  Please help.

Kevin55 by Apprentice
  • 1430 Views
  • 2 replies
  • 0 likes

Canon printer MX876

When I power on the printer each time, Error message 6500 appears as the alarm lights up.The printer head also does not move to the mid section when I tried to check the ink tanks. It moves a little, then stops.What is wrong with the printer?  

grace23 by Apprentice
  • 1531 Views
  • 2 replies
  • 0 likes

TS8050 Not Scanning

I have a TS8050, running into my MacMini via USB.  Printing works well, however when I try to scan, I get the following message: Cannot communicate with scanner for these reasons:- Scanner is turned off.- USB cable is disconnected. Please check and t...

atkinsm1 by Apprentice
  • 1076 Views
  • 1 replies
  • 0 likes

MX870 pgbk trouble help?

First my print quality was bad.  I opened the cover to check the ink levels, and then I got the unknown print head error.  I tried the fixes recommended for that to no avail, so I replaced the print head and the error went away.  But the print qualit...

printer test.jpg
wren by Apprentice
  • 1210 Views
  • 3 replies
  • 0 likes

MG3600 Printing black box around images

I was not having this problem with my previous printer that died from old age so it's not necessarily the document. I have been trying to print what should be simple coloring pages so a basic image with white space around it. Every page comes out loo...

anrmom by Apprentice
  • 1250 Views
  • 1 replies
  • 0 likes

C, BK & Y not printing TS8020

I don't usually print color on my one year old printer (Pixma TS 8020) but was asked about printing color from an Amazon customer so I tried printing an image. It came out horrible. Did a Print Nozzle Check and found out the C, BK and Y are not print...

Canon MX922- Support Code 6000 Please Help!!

Hello can anyone please help!? I really  print and I tried everything from turning off my printer to disconnecting the cable to starting it again. I even called a support number and they almost hacked my computer. They were trying to sell me services...

printer.jpg

Poor color quality

I have a Pixma TS9020 printer. The color printing and coping is poor. I have used genuine canon ink and generic because the canon ink is so expensive. Anyway, if I print a regular page, there are about three eighth sections that run across the page t...

Mike13 by Contributor
  • 1251 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!