This is teh MOST frustating thing. Have reserached this a lot. Removed the printheads and flushed with hot water for 10 minutes. Perfectly clean. Still does NOT print any color or CYAN. So when the original is color and I select black & white or gray...
Mac 10.13.6 system, using Canon Pixma MG7720. Occasionally I get prompts asking if I want to (re)install the printer software. Usually when I check it shows the printer is installed. Could this be caused by problems with the printer prefs? Or som...
First I did multiple cleanings, followed by multiple deep cleanings. Then I replaced all the cartridges with brand new ones. On the print test, all colors print fine, but not black text. Then I noticed that there are two lights on each cartridge (one...
Hello I am looking for help as I have a small Canon TS3160 printer which has always worked great and now all of a sudden it says there is a paper jam. I have looked inside the printer very carefully and cannot see any paper anywhere at all. Any advi...
Out of the blue, my MX472 has started sucking in the paper about halfway and then starts printing which then, of course, cuts off at the bottom of the page. I have followed instructions for realignment thinking that would've worked but nope. I'd be...
I have had a Cannon MX922 printer for years. I print back to back copies, i.e. 2 pages on the same sheet of paer, etc.. It used to print head to head, but now it does head to foot. I have now idea how it got changed. How do I change it back to printi...
I'm printing logos through my Cricut to cut out and the top two on every page have thin black lines going through them and then they fade out on the other two rows. I was doing the same operation with a previous printer and didn't have he issue. Any ...
Following manual instructions (page 145), press WIFI until ON flashes, the press WIFI again. Printer seems to print two pages but both are completely blank. Printing from my web browser works fine. Printer is connected by USB.
I have a Pixma TR8520. I can only scan 3 or 4 pages into 1 document and I get an error message telling me the scanner is off. Why can I not scan more than 3 pages at a time?
Instructions on manual for paper choice to print Borderless does not match options on computer instuction says paper choice should offer “Borderless” but that does not appear!I print beautiful 8.5 x 11 with border about 3mm but have not been able to ...
it WILL print if I print to 4 x 6 photopaper. This tells me that the black cartridge print head isn't clogged. All other colors print fine in a 8.5 x 11 format but NO black. Sometime ago, I got to a paper thickness setting (as I recall) to adjust pho...
All ink color tanks, including black are half full but the black will not print. The print setting is on "black/color.
The printer is 6 to 12 months old, usage is moderate, scan-to-pdf is infrequent. Recently the quality has degraded significantly.Added 12/17The problem wasn't with the scanner. I had copied the originals "on top of the previous copy" several times. S...
Hello,I have a Canon D480 on Windows 7 using Omni Page 18..1When I bring up the toolbox and check the threshold I am always at 72.I want a deeper scan somewhere in the 120-140 range.I also scan legal and letter sizes through the ADF.I can set the thr...
I have a Pixma TS6320 printer. I have latest drivers installed. [TS6300 series MP Drivers Ver.1.02 (Windows) 10/04/21]. I have no problems printing greeting cards, documents, etc. Any envelope I try to print is way off center. The whole left side is ...
