I can print, copy but not scan. This started when updated to new Dell running windows 11. I swap printer out with MG3620 and no issue. I put MG3520 on other PC running Windows 10 pro and have identical issue.
After a lot of research i decided to buy this printer for A3 and being able to print on card. The printer arrived on Wednesday and i spent the whole of the evening and Thursday trying to connect to my wifi. After many phone calls to Canon, my int...
Can you tell me how to keep this printer on all the time?
It's a new cartridge, I have put it through both cleaning and deep cleaning multiple times and magenta is still streaking. Ihave had this printer for probably close to 10 years so I'm wondering if I need to do a physical cleaning or something?
My G6000 prints, sometimes. It's always stuck on the COPY menu item. If it doesn't print, it will sometimes if I go to the menu and press OK. I cannot print without a continuous "Notification" every 30 seconds that the Canon G6000 Printer series send...
My printer/scanner prints beautiful photos from images already saved on my computer or directly printing from a photo on the glass; however, when I try to scan the image to my laptop to view or print, the image is not clear on the monitor and the pho...
I refill my black ink cartridge, but now it is telling me I am out of ink when I know I am not. How do I override this?
I just got this printer, I set it up with my computer and I put the ink cartidges it came with. But it is not printing any ink onto the paper, my print comes out blank. I have done the deep cleaning, regular cleaning, put in new cartidges and everyth...
Hi there! I have read muuuultiple manuals and other questions asked, however, I feel like I still can't get my prints to not have horizontal lines. When doing the manual printer head alignment I noticed almost none of my options were great. I've run ...
Hi All, I had printer error service error 6C10 so disassembled my IP4600 so I could get to the ink pads to clean them. Whilst doing this a metal 'L' shaped bar has come off and I'm not sure where it goes as I try to put my printer back together agai...
Hello All!I'm ripping my hair out on this one, so I hope someone can help.I have the MG 8120 and the rear sheet feeder is not working correctly at all. It is definitely not a "clean the rollers" etc issue.At times, the gap between the roller and the...
Hi All,My Canon MX722 just died mid-print. Just powered off and I've tried every troubleshooting measure I can think of or find online. I think it's dead. Beyond recommendations for getting it to work can anyone recommend a current printer that uses ...
I applaud Canon for having water-based ink for their printers. I spilled Canon black ink GI-290 (BK) on our light beige carpeting and magenta colored ink GI-290 (M) on my hands; but, to my surprise, the ink stains were easily removed with soap and wa...
Hi, I have a Pixma G2420 (it's less than a about a month and a half old), whenever i print, it prints the first page fine, after that the second paper gets pulled-in midway then the printer stops for a few seconds (3-4 seconds) and resumes printing, ...
| Subject | Author | Posted |
|---|---|---|
| 01-10-2026 07:07 PM | ||
| 01-10-2026 03:56 AM | ||
| 01-09-2026 09:23 PM | ||
| 12-27-2025 03:38 PM | ||
| 12-19-2025 11:55 AM |
New to the community? Here's some information to help you get acquainted:
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.