Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Pixma TR4720 jams every time!

Brand new machine! Never had a chance to use it yet. Just testing it out and I can't get it to feed the paper in straight no matter what I try. I have yet to complete a decent copy of anything because the paper jams up every single time I try to make...

cahoy123 by Apprentice
  • 804 Views
  • 1 replies
  • 0 likes

Resolved! Offline printer

I have a new MacOS Monterey and my MP495 printer is offline. I have checked all plugs and the printer is working but I don't know how to get it online.

Ottawa by Apprentice
  • 1044 Views
  • 3 replies
  • 0 likes

Envelope jammed...PIXMA MG2522

I tried to print on an envelope and apparently I put it in the wrong way. The envelope is stuck and I don't know how to get it out. I also tried to call product support, and for some reason they cannot recognize either of the two telephone numbers I ...

radiodon by Apprentice
  • 503 Views
  • 4 replies
  • 0 likes

Pixma TS9521C Rear Feed error Code 1000

Just got my new printer a couple weeks ago. I have yet to be able to print from the rear feed. I am trying to print from the rear feed and I keep getting a code 1000 which is either paper is loaded wrong and/or there is no paper loaded.1. Paper is th...

dzway by Apprentice
  • 595 Views
  • 3 replies
  • 0 likes

Support Code 2804 on Canon MX922

Support Code 2804 MDF failure to scan.  'doc size not suitable for duplex scanning'.  Win 7, Pixma MX922 Tech support tried valiantly to figure this out but could not, so I'll share my solution.  I suddenly kept getting Support Code 2804 failure on M...

Pinkish photos

Just opened and set up my tr8620.  Very first photo comes out very pink.  How do I fix this?  Thanks. 

Jklu by Apprentice
  • 337 Views
  • 5 replies
  • 0 likes

Pixma ts5151 printer

Can anyone tell me how to retract the paper tray on this printer? On unboxing, it was retracted making the front completely flush. It pulled out ok but doesn’t seem to want to retract. Any advice?

Canon Pixma TS5320 not printing well

My printer ink is new, off brand ink ordered from Amazon a few months ago. I installed the ink, but when I print anything in black or color, nearly half of the page is not printed or the printer spits out a blank sheet with zero ink on the paper. Thi...

MX922 won't print in black only

How can I get my MX922 to use only the black cartridges to print in black and white?  I have seen the replies from Canon that do not address the issue; even to the point of suggesting an override by pressing the red Stop button.  I figured out that i...

mspcock by Apprentice
  • 533 Views
  • 1 replies
  • 0 likes

Resolved! Help with printer TS9060

I have a PIXMA TS9020 printer. I have this error during scanning ''Printer is in use or an error has occurred. Check status. Scanner driver will be closed. Code: 2, 140, 3. 

comfycj by Apprentice
  • 333 Views
  • 2 replies
  • 0 likes

Resolved! mystery page print

My Canon ix6800 has developed an odd and annoying quirk.  Any time I print (usually from Word), the printer first spits out 2/3 page from our company's 2020 tax return.  I never had this document on my computer, although my husband may have and our w...

MX490

Please tell me what I need to do.  I bought my daughter the MX490 to use for school.  Now I find out that since it has a FINE color cartridge the black cartridge will not work when trying to print documents.  On-line and troubleshooting says that if ...

MX922

I have a Canon MX922 every now and then I keep getting an error tells me to shut it off unplug it then plug it back in and turn it back on but the air is still there I'll wait a few days and then the air disappears Don't know why

Bigvic by Apprentice
  • 311 Views
  • 2 replies
  • 0 likes

printer settings

I have a TR 4520 printer using wifi connection to I-mac with Catalina op system. A couple of weeks ago, I modified settings to print photos. I then restored them, but printer will not do 2 sided and prrint speed is very slow. How do I get function ba...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.