Camera Software
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! Using Canon Camera Connect with Two Cameras

There is probably a simple answer to this but I can’t find it. I’m running two Canon cameras. Can I readily switch between them on the Canon Connect app or do I need to download the app twice? I am able to switch using the side menu but it’s a pretty...

ChrisJ by Apprentice
  • 1501 Views
  • 4 replies
  • 0 likes

Resolved! R5 New Firmware 1.8.1

My Canon R5 has firmware 1.7.1. I got a notice that new software is available but when I put in my Os system (Monterey 12.6.3) it recommended my existing firmware. I see that 1.8.1 is available for download also, although not what was recommended. I ...

tangogal by Contributor
  • 1821 Views
  • 6 replies
  • 0 likes

EOS Utility 3 only works once after reboot

his is Ventura. Latest MAC OS, camera firmware, EOS Utility software.Others have described this issue. Frustratingly in the forum it has been marked as “solved” when it definitely is not.Camera connects just fine to Capture OneAlso annoyingly, this s...

jakobox by Contributor
  • 775 Views
  • 2 replies
  • 0 likes

EOS Utility "The connection was lost" error

Hello,I have had this problem (see on the screenshot below) so many times! I use a Canon 5Dsr and the EOS utility version is 3.14.30.4. Please let me know if any other information is needed and how I can solve this problem. The camera is used to auto...

SGI_camea_error.png

Resolved! Firmware update 1.8.1 on R5

Hello,I am new to this forum.I wish to update firm ware from 1.5.2 to 1.8.1,should i down load directly the latest firmware for R5(1.8.1) or go thru past upgrade like 1.7?Thank yousyd

samhasan by Apprentice
  • 1446 Views
  • 4 replies
  • 0 likes

Powershot sx540 HS firmware update

After my Powershot sx540 HS was updated with the latest firmware it will no longer connect to my phone.  The phone and the camera recognize each other but at the last step of authorizing access to the SD card the camera disconnects. However, if you p...

Lcomer by Apprentice
  • 630 Views
  • 0 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements