Trying to connect and use my VIXIA HF G50 camcorder as my external camera on my 2015 MacBook Pro in order to stream a Zoom meeting. Connected HDMI cord from camcorder to MacBook. MacBook does not seep to even recognize it as even being there (not sho...
Has anyone been able to find a firmware upgrade for the Vixia GX10 with Clog-3? I checked the firmware file VNA4.FIM version 1.0.4.0 for the GX10 and the XF400 and found the firmware files to be idetntical. Has anyone tried to install the VNA5.FIM on...
Hi! I have a Canon ES8400V 8mm camcorder. I‘d like to move the videos from the cassettes to my laptop. I looked at the manual online and didn’t find anything on the subject. I saw on another post that I would have to use the Canon software applicatio...
Each time the camera is turned on, the camera comes on as normal then after a couple of seconds I get the following message 'Task in Progress. Do not disconnect power source.' The camera will turn on after this message and I am unable to restart th...
I have an old unit, but cannot find the manual. It is no longer available from Canon, so I would like to know if anyone here knows where I can get a manual (preferably PDF).How do I charge the battery?Thank you
Hello,We have a Canon HV20 MiniDV camcorder that we've filled 20+ tapes with over the years of special family moments. We'd love to import these videos and create DVDs or make them available online for others to view. When it comes to importing the...
Hello. I have a Vixia HF R50 camcorder. The camera mount for the tripod wasn't in securely and the camera fell off the tripod. It hit a floor with very thin carpeting and the touchscreen popped out. Can that be popped back in? Or, can I take out...
I am trying to transfer my old min dv tapes to pc. I have purchased a firewire and a firewire-usb adaptor so that I can link my Canon MV500 camcorder to pc, but the pc shows no indication that it is seeing the camera. Do I require software??
Hi there,My old Vixia HV30 is finally dead. I hope to find a new camcorder to record piano recitals with better video and audio quality than HV30. I usually did not edit much, and connected 2 condenser mics to the camcorder through Mixpre II-6 as aud...
There is Canon Picture Style Editing software compatible with my Canon M50 Mark ii. Apparently, there is no such Canon software for my VIXIA HF G70. You can, blindly, edit picture styles in the camera, take a shot, see if you're even close to what yo...
I recently got the Vixia HF G70 and have downloaded some pf2 and pf3 files because they were the only "custom picture files" I could find. The pf3's came from a YouTuber and the pf2's came from the canon website. I then put them on a SD card and trie...
Just "picked" up the Canon Pick PTZ Camera. Is there a way for it to "auto shoot" video. It does for photos but doesn't seem to do it for videos.
I have a Canon Vixia HF G30 which I purchased in 2015. Recently, it has begun to randomly restart itself during recording. I have reset the camera back to the defaults and formatted the SD card. Though this seemed to help for a little while, the ...
re: VIXIA HF G70. Can it be tethered to output to a monitor while recording?
Hello,I have a VIXIA HF R400.The lcd display slightly popped out of the flip open housing door (or whatever it is called) however I pushed it back in.The camera works fine however I noticed that there is a small area (upper right side) of the touchsc...
| Subject | Author | Posted |
|---|---|---|
| 01-23-2025 03:13 AM | ||
| 12-27-2024 07:58 AM | ||
| 10-21-2024 11:17 AM | ||
| 09-16-2024 05:35 PM | ||
| 08-13-2024 03:22 AM |
New to the community? Here's some information to help you get acquainted:
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
