Camcorders
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Vixia HFR200 Charger cord works intermittently

I have a vixia HFR200 nearly 4 years old. The connection from the charger cord to the camwera works intermittently. I have to put slight sideways pressure on the plug that goes into the camera before the charger light starts flashing. If it's the mal...

nov51947 by Apprentice
  • 3298 Views
  • 1 replies
  • 0 likes

Imagemixer problem

Hello,i am using already for year Canon camcorders (HF10 and HSF200). Both work fine!I always used the complimentary ImageMixer software to transfer the m2ts files and to assemble them to a movie. However, since a few weeks, ImageMixer is not startin...

Babakoto by Apprentice
  • 4413 Views
  • 4 replies
  • 0 likes

Resolved! External mic sound level

I'm recording sound from a mixer. Whenever the audio goes down the agc kicks the record level up. I've looked through the manual, but I can't find any way to disable agc. Any ideas? Also, I'd like to be able to manually set the record level. Again, I...

Vixia HF M300 - White Screen of Doom??

The touch-screen on my Vixia HF M300 has gone completely white. As in - there is light, so obviously it is getting power. But no image, no - nothing. No amount of turning the power on/off seems to do much, nor does wiggling the hinges on the display,...

smart AUTO icons

Dear Canon: When lighting for video, is it preferable for the smart AUTO icon to show "blue skies" or "vivid colors"? Versus "bright" (possibly increasing shutter speed, staccato looking) or "dark" (possibly decreasing shutter speed, blurry looking)....

Recovery of scenes on built-in memory

In a failed attempt to delete ONE SCENE from my VIXIA HF G10 my entire built-in memory was erased in error. I called Canon Tech Support and they knew of nothing that would retireve this data (only from the SD cards). <sigh> I have not used the camera...

xf 300 pan

I have a xf 300 and when i pan the video is jittery how can i stop this.

hjones by Apprentice
  • 3448 Views
  • 2 replies
  • 0 likes

Vixia HF52 Audio feedback

I am using the HF52 as a source for a closed circuit tv to view in a building across the street from our church.  We are running HDMI over coax and converting back to HDMI.   For audio we are trying to connect to the sound board to the mic input.  It...

Rzrbk by Apprentice
  • 3682 Views
  • 1 replies
  • 0 likes

XA20 LPCM audio playback problem on Win7

Hi.  I have two Win7 machines.  One plays XA20's LPCM audio on successfully with the Realtek ALC 892 codec.  The other machine can play dolby digital 2 channel audio of an XA10 but not the LPCM audio of the XA20.  That machine has Realtec 889 codec (...

NickMDal by Enthusiast
  • 3250 Views
  • 1 replies
  • 0 likes

Camera selection

I am creating training videos for online distribution and am deciding which camera is best for this purpose. I have been looking at either the vixia r62 or the g30. I read a couple reviews that give the r62 a better rating at one-third the price.I al...

Cgangnes by Apprentice
  • 4297 Views
  • 5 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements