Showing results for 
Show  only  | Search instead for 
Did you mean: 


Resolved! Old School GL2-Upload To Computer Via Camera?

Hi gang, I did this back in 2008 with my first GL2 (just picked up a new-old stock one) with a different operating system and machine. Not finding any software that will work with Windows 10, 64 bit.  Any ideas on how I can hook the camera up to an H...

FPS setting

Is there a setting for FPS for the  Canon Optura 50 camcorder? I have read through the user manual but could not find ifthere is such a setting? If there is no setting, what does the  camcorder record at, i.e. what FPS?Thanks

no1texan by Contributor
  • 1 replies

40 vs. 21

The Vixia HF G40 and G21 look as close to the same cameras just with a different number on the panel. The 21 has a slightly smaller LCD panel but besides that I don't see one difference between the two models. Are there any when it comes to something...

rhckm49 by Enthusiast
  • 10 replies


My manual says this camera has WIFI. But I can't find that setting in the camera. Help?

VIXIA HF R70 question

My VIXIA HF R70 camera won't let me record at 35mbps or at 1/2x speed and I can't figure out why not. Whenever I attempt to change the bitrate to 35mbps the option is greyed out. Same issue with changing recording speed to 1/2x speed. Any advice woul...

Canon G40 lens hood

I was wondering about where lens hoods for the G40 model can be found. Is it straight through Canon, I do have one but may like a second one to be safe.

rhckm49 by Enthusiast
  • 1 replies

Resolved! Canon xa11 greyed out selections

Im trying to do a timelapse on the xa11  camcorder but no matter what i try the frame rate and slow and fast motion selection is greyed out ive looked at a youtube video  Gus Da Costa it looks so simple but the two options i need are greyed  out  i c...

Desmond1 by Apprentice
  • 2 replies

Elgato video Capture with Canon Elura / Issues with audio

I am using the setup recommended on page 36 of the manual. Using Canon Elura with Elgato Video capture. I have the Elgato connected to PC via USB. to the Elgato I am connecting an S-VHS male cable that is connected to the S-VHS input of the Elura. I ...

belvezet by Apprentice
  • 0 replies

FPS Setting for Canon Optura 50 camcorder

I am using a Canon Optura 50 camcorder to record 8mm from Sears Du All Eight projector and was told to set the camcorderto 60 fps to  eliminate  flicker and/or banding. In reading the user manual, I can't find how to set the FPS on the camcorder. Tha...

no1texan by Contributor
  • 0 replies

Resolved! MP4 Join Tool No Working

Is there anyone else as frustrated as I am with the way my camcorder automatically splits files at 4 Gb size?  I've downloaded the Canon MP4 join tool but every time I attempt to join clips that are directly transfered from my Vixia HF R800, it tells...

VIXIA HF R800 Audio Quality

I'm having trouble getting a clear sound from our church sound board thru the vixia 800 camcorder. Sounds distorted & "tinny". 

Help on chrome bokk

Hi I have a cannon vixia hf m31 and was wondering if any one could tell me how to get my chrome book to read the videos 

Recording over previous recording

I would like to erase the previous recording on a DVD tape on my Canon Optura 50 and use tape again. Will a new recording erase the previous recording? Thanks

no1texan by Contributor
  • 3 replies

Cord query

 Hi, I'm really struggling to find a cord I need for my CANON VIXIA HF G10. Please see attached image. Anyone know which cord I need to purchase for this one? Thanks so much for your help.

IMG_9655 2.jpg

Resolved! Camcorder vixia hf r800

I am using a 64 gb hd card to record. If I record a video for an hour will it all stay in one file? If it splits up will I be notified to restart camera when additional file starts? What if I record at the lower quality setting, will it then go into ...

jimblair by Contributor
  • 5 replies
Getting started

New to the community? Here's some information to help you get acquainted:

03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.