Hi all, I recently purchased a Feelworld T7 monitor for my XA45. When I connect the monitor using HDMI, I get video, but I also get a terrible squelching noise, like a feedback loop. I tried turning off the Mic switches on the camera, but it didn't...
I have a question about the two CN-E servo lenses (The 18-80mm and the 70mm-200mm). I suspect I know the answer, but wanted to check here. I have read the manual for the lens, and there's a zoom controller port that seems to only work with the $2000 ...
I recently acquired a 40x Super Zoom camcorder, but I don't have any specs for attaching a lens hood. Any body have this information, please? Many thanks.
Hello, I have the VIXIA HF R700 that I want to use in my Zoom studio and I would like to know if there is a wireless remote that works with it. I just need zoom in and out capability, that's all.
Because my Canon Legria/Vixia HF G10 camcorder had broken down, I recently purchased the Legria/Vixia HF G70 to my complete satisfaction. A great buy! Only, I really miss a remote control, which was included with the HF G10. It even included a wirele...
Long shot, I'm afraidI want to backup mini discs from an obsolete Canon PAL DC20 CamcorderThe cable designation is MTC-100 which has an unusual proprietory connector at the camcorder end but is basic RCA, 2 audio and 1 video at the otherI'd appreciat...
Hello again!I recently received great advice from this forum on a wireless mic. Now I'm researching, looking for a shotgun-style external mic. My Canon Vixia HF R80 has the 3.5 port but nothing on top of the camera to support a mic; no mount. Is ther...
Hi Everyone! I have a Canon Vixia HF R80 camcorder and would like to start filming some of my hunts. This requires me to have a wireless mic attached to me in the field. Can anyone tell me exactly what I should get that will work with my camcorder? ...
My vixia hf100 won't hold a charge. The light blinks when its plugged in but it never actually charges. Should I get a new battery or is it an issue with the charger?
Hello, can the canon XA50 work with the Sennheiser XS wireless digital XLR base set with the transmitter plugged into a soundboard and the receiver plugged into the xlr handle line 1 mic?
Is this possible? For instance, if I wanted to add a polarizer filter.
Just received my new R5C last week. I also purchased the AD-E1 adapter so that I can use my EX Speedlites with it. However, I have not been able to get the camera to recognize any of my old EX flashes including my 580 EX II. Could I have a defective...
Recently purchased a Vixia hf r40 so I can take Christmas video, not knowing I was going to get a hand me down of a Vixia hf r10. Tried using both during Christmas eve and Christmas but the videos were dark, I guess due to the lighting in the room. ...
The Sennheiser AVX-ME2 digital lavs do not work on my c200. Only the G2 analogue works. I used the digital on my c100 and it sounded great. On the c200, the audio is squelched and distorted. You can clearly see it in the waveform on my premiere timel...
Just purchased an hfg70 camcorder. It appears that the USB out is non-standard, not USB-C. The socket is oval at both ends and there is a tab in the middle which alone is wider than a USB-c plug. I have a variety of USB adapters, and none fit the soc...
| Subject | Author | Posted |
|---|---|---|
| 01-20-2026 09:02 AM | ||
| 06-18-2025 10:00 PM | ||
| 03-30-2025 11:06 AM | ||
| 02-27-2025 12:02 PM | ||
| 01-31-2025 05:24 AM |
New to the community? Here's some information to help you get acquainted:
07/22/2026: New firmware updates are available.
EOS R6 Mark III - Version 1.1.0
05/13/2026: New firmware updates are available.
EOS R5 Mark II - Version 1.3.0
EOS R6 Mark II - Version 1.7.0
03/17/2026: New firmware updates are available.
SELPHY CP1500 - Version 1.0.7.0
01/20/2026: New firmware updates are available.
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
