Quick question to see if anyone knows what the problem could beCanon R5 C camera with the EF->RF adapter (the one with the control ring) plus a Sigma EX series 10-20mm lens. This is a crop sensor lens.when I use this combination together in video mod...
Hello, My camera canon XA11 got a problem some black dot on the image, but still on warranty.After send the camera on repair I have been told that warranty doesn't cover that parts of camera (that the sensor).Can someone help me to have more info abo...
This just started happening recently:Using a canon RF>EF adapter (we've tried both the regular one, and the ND one) in video mode the camera will occasionally not be able to keep the lens in any aperture other than all the way open. If you try and cl...
Im looking the best way to control my C70 while it is on a jib. How do i control the camera wirelessly other than using the Browser Remote?
Hi all, I am trying to save my camera settings to the SD card. The card is not locked, have tried different sized cards (32, 64) and still the option is greyed out under format as well as under the transfer menu.Any thoughts? Have tried in 3 differe...
Hello,Wondering if someone can help me with this, I recently bought a used Canon C300 MK III and it works fine but the audio hiss levels are off the charts. It seems like I can't record past mark 5 on mic/+48 and even at mark 5 the level of hiss is u...
Hello,I have taken some footage on the c70 using the raw lt setting. I am not sure where it lives on the SD card. I can view the the footage when the sd is in camera, naturally, but when I connect to computer and open XF utility, I see only my non-ra...
I've had my R5C for less than 4 months and my micro HDMI port is no longer sending signal to my monitor/s. There are zero signs of damage to the connector. I even looked at it under a loupe. No bent pins or anything. USB-C above it works fine but...
HiConcerns: Canon C200 proper exposure in RAW with WFMSome DOPs like Rubidium say: expose an 18% gray card at 42IRE when preset at C-log3 because this is what the canon papers recommend for C-Log2 and since RAW is recorded in C-Log2 in this camera...
I have two of this camera that I use at the same time and I really need to make one have a different file prefix than the other so I can save the videos to the same folder. The entire 4th page of the "Recording Setup" menu is grayed out and un-select...
Clog2 correct exposure puts middle grey at 407/39.8%. the canon default clog2 to rec709 lut still puts middle grey at 407/39.8%, which makes the image look dark. if I move middle grey to 512/50%, the image looks too bright and washed out. so what is ...
I cannot for the life of me figure out how to bring the box back up. I used a Xeen 35mm EF with the rf adapter for a shoot, then when I switched back to a 24-105mm RF lens, the focus box was gone. I've tried to change a million settings and cannot fi...
Hi everyone,I just bought Canon VB-M46 one month ago. Thankfully, everything functioned smoothly. However, when I want to use the camera with my Python app by OpenCV library, I met one major problem regarding connection. Here is the detail:- I want t...
Could someone point me in the right direction to find a user manual. I have been all over the site which seems to just keep sending me is a loop or rabbit hole. Getting info on broadcast lenses is like getting info out of the government.Yes the produ...
We have manually setup an IPV4 address on the camera and additionally disabled IPV6. All computers and cameras are on the same subnet. We can ping the IPV4 ip address just fine. When trying to access the camera via the IPV4 IP address in a web browse...
